======================== Building LLVM with CMake ======================== .. contents:: :local: Introduction ============ `CMake `_ is a cross-platform build-generator tool. CMake does not build the project, it generates the files needed by your build tool (GNU make, Visual Studio, etc.) for building LLVM. If **you are a new contributor**, please start with the :doc:`GettingStarted` page. This page is geared for existing contributors moving from the legacy configure/make system. If you are really anxious about getting a functional LLVM build, go to the `Quick start`_ section. If you are a CMake novice, start with `Basic CMake usage`_ and then go back to the `Quick start`_ section once you know what you are doing. The `Options and variables`_ section is a reference for customizing your build. If you already have experience with CMake, this is the recommended starting point. This page is geared towards users of the LLVM CMake build. If you're looking for information about modifying the LLVM CMake build system you may want to see the :doc:`CMakePrimer` page. It has a basic overview of the CMake language. .. _Quick start: Quick start =========== We use here the command-line, non-interactive CMake interface. #. `Download `_ and install CMake. Version 3.20.0 is the minimum required. #. Open a shell. Your development tools must be reachable from this shell through the PATH environment variable. #. Create a build directory. Building LLVM in the source directory is not supported. cd to this directory: .. code-block:: console $ mkdir mybuilddir $ cd mybuilddir #. Execute this command in the shell replacing `path/to/llvm/source/root` with the path to the root of your LLVM source tree: .. code-block:: console $ cmake path/to/llvm/source/root CMake will detect your development environment, perform a series of tests, and generate the files required for building LLVM. CMake will use default values for all build parameters. See the `Options and variables`_ section for a list of build parameters that you can modify. This can fail if CMake can't detect your toolset, or if it thinks that the environment is not sane enough. In this case, make sure that the toolset that you intend to use is the only one reachable from the shell, and that the shell itself is the correct one for your development environment. CMake will refuse to build MinGW makefiles if you have a POSIX shell reachable through the PATH environment variable, for instance. You can force CMake to use a given build tool; for instructions, see the `Usage`_ section, below. You may also wish to control which targets LLVM enables, or which LLVM components are built; see the `Frequently Used LLVM-related variables`_ below. #. After CMake has finished running, proceed to use IDE project files, or start the build from the build directory: .. code-block:: console $ cmake --build . The ``--build`` option tells ``cmake`` to invoke the underlying build tool (``make``, ``ninja``, ``xcodebuild``, ``msbuild``, etc.) The underlying build tool can be invoked directly, of course, but the ``--build`` option is portable. #. After LLVM has finished building, install it from the build directory: .. code-block:: console $ cmake --build . --target install The ``--target`` option with ``install`` parameter in addition to the ``--build`` option tells ``cmake`` to build the ``install`` target. It is possible to set a different install prefix at installation time by invoking the ``cmake_install.cmake`` script generated in the build directory: .. code-block:: console $ cmake -DCMAKE_INSTALL_PREFIX=/tmp/llvm -P cmake_install.cmake .. _Basic CMake usage: .. _Usage: Basic CMake usage ================= This section explains basic aspects of CMake which you may need in your day-to-day usage. CMake comes with extensive documentation, in the form of html files, and as online help accessible via the ``cmake`` executable itself. Execute ``cmake --help`` for further help options. CMake allows you to specify a build tool (e.g., GNU make, Visual Studio, or Xcode). If not specified on the command line, CMake tries to guess which build tool to use, based on your environment. Once it has identified your build tool, CMake uses the corresponding *Generator* to create files for your build tool (e.g., Makefiles or Visual Studio or Xcode project files). You can explicitly specify the generator with the command line option ``-G "Name of the generator"``. To see a list of the available generators on your system, execute .. code-block:: console $ cmake --help This will list the generator names at the end of the help text. Generators' names are case-sensitive, and may contain spaces. For this reason, you should enter them exactly as they are listed in the ``cmake --help`` output, in quotes. For example, to generate project files specifically for Visual Studio 12, you can execute: .. code-block:: console $ cmake -G "Visual Studio 12" path/to/llvm/source/root For a given development platform there can be more than one adequate generator. If you use Visual Studio, "NMake Makefiles" is a generator you can use for building with NMake. By default, CMake chooses the most specific generator supported by your development environment. If you want an alternative generator, you must tell this to CMake with the ``-G`` option. .. todo:: Explain variables and cache. Move explanation here from #options section. .. _Options and variables: Options and variables ===================== Variables customize how the build will be generated. Options are boolean variables, with possible values ON/OFF. Options and variables are defined on the CMake command line like this: .. code-block:: console $ cmake -DVARIABLE=value path/to/llvm/source You can set a variable after the initial CMake invocation to change its value. You can also undefine a variable: .. code-block:: console $ cmake -UVARIABLE path/to/llvm/source Variables are stored in the CMake cache. This is a file named ``CMakeCache.txt`` stored at the root of your build directory that is generated by ``cmake``. Editing it yourself is not recommended. Variables are listed in the CMake cache and later in this document with the variable name and type separated by a colon. You can also specify the variable and type on the CMake command line: .. code-block:: console $ cmake -DVARIABLE:TYPE=value path/to/llvm/source .. _cmake_frequently_used_variables: Frequently-used CMake variables ------------------------------- Here are some of the CMake variables that are used often, along with a brief explanation. For full documentation, consult the CMake manual, or execute ``cmake --help-variable VARIABLE_NAME``. See `Frequently Used LLVM-related Variables`_ below for information about commonly used variables that control features of LLVM and enabled subprojects. .. _cmake_build_type: **CMAKE_BUILD_TYPE**:STRING This configures the optimization level for ``make`` or ``ninja`` builds. Possible values: =========================== ============= ========== ========== ========================== Build Type Optimizations Debug Info Assertions Best suited for =========================== ============= ========== ========== ========================== **Release** For Speed No No Users of LLVM and Clang **Debug** None Yes Yes Developers of LLVM **RelWithDebInfo** For Speed Yes No Users that also need Debug **MinSizeRel** For Size No No When disk space matters =========================== ============= ========== ========== ========================== * Optimizations make LLVM/Clang run faster, but can be an impediment for step-by-step debugging. * Builds with debug information can use a lot of RAM and disk space and is usually slower to run. You can improve RAM usage by using ``lld``, see the :ref:`LLVM_USE_LINKER ` option. * Assertions are internal checks to help you find bugs. They typically slow down LLVM and Clang when enabled, but can be useful during development. You can manually set :ref:`LLVM_ENABLE_ASSERTIONS ` to override the default from `CMAKE_BUILD_TYPE`. If you are using an IDE such as Visual Studio or Xcode, you should use the IDE settings to set the build type. **CMAKE_INSTALL_PREFIX**:PATH Path where LLVM will be installed when the "install" target is built. **CMAKE_{C,CXX}_FLAGS**:STRING Extra flags to use when compiling C and C++ source files respectively. **CMAKE_{C,CXX}_COMPILER**:STRING Specify the C and C++ compilers to use. If you have multiple compilers installed, CMake might not default to the one you wish to use. .. _Frequently Used LLVM-related variables: Frequently Used LLVM-related variables -------------------------------------- The default configuration may not match your requirements. Here are LLVM variables that are frequently used to control that. The full description is in `LLVM-related variables`_ below. **LLVM_ENABLE_PROJECTS**:STRING Control which projects are enabled. For example you may want to work on clang or lldb by specifying ``-DLLVM_ENABLE_PROJECTS="clang;lldb"``. **LLVM_ENABLE_RUNTIMES**:STRING Control which runtimes are enabled. For example you may want to work on libc++ or libc++abi by specifying ``-DLLVM_ENABLE_RUNTIMES="libcxx;libcxxabi"``. **LLVM_LIBDIR_SUFFIX**:STRING Extra suffix to append to the directory where libraries are to be installed. On a 64-bit architecture, one could use ``-DLLVM_LIBDIR_SUFFIX=64`` to install libraries to ``/usr/lib64``. **LLVM_PARALLEL_{COMPILE,LINK}_JOBS**:STRING Building the llvm toolchain can use a lot of resources, particularly linking. These options, when you use the Ninja generator, allow you to restrict the parallelism. For example, to avoid OOMs or going into swap, permit only one link job per 15GB of RAM available on a 32GB machine, specify ``-G Ninja -DLLVM_PARALLEL_LINK_JOBS=2``. **LLVM_TARGETS_TO_BUILD**:STRING Control which targets are enabled. For example you may only need to enable your native target with, for example, ``-DLLVM_TARGETS_TO_BUILD=X86``. .. _llvm_use_linker: **LLVM_USE_LINKER**:STRING Override the system's default linker. For instance use ``lld`` with ``-DLLVM_USE_LINKER=lld``. Rarely-used CMake variables --------------------------- Here are some of the CMake variables that are rarely used, along with a brief explanation and LLVM-related notes. For full documentation, consult the CMake manual, or execute ``cmake --help-variable VARIABLE_NAME``. **CMAKE_CXX_STANDARD**:STRING Sets the C++ standard to conform to when building LLVM. Possible values are 17 and 20. LLVM Requires C++17 or higher. This defaults to 17. **CMAKE_INSTALL_BINDIR**:PATH The path to install executables, relative to the *CMAKE_INSTALL_PREFIX*. Defaults to "bin". **CMAKE_INSTALL_INCLUDEDIR**:PATH The path to install header files, relative to the *CMAKE_INSTALL_PREFIX*. Defaults to "include". **CMAKE_INSTALL_DOCDIR**:PATH The path to install documentation, relative to the *CMAKE_INSTALL_PREFIX*. Defaults to "share/doc". **CMAKE_INSTALL_MANDIR**:PATH The path to install manpage files, relative to the *CMAKE_INSTALL_PREFIX*. Defaults to "share/man". .. _LLVM-related variables: LLVM-related variables ----------------------- These variables provide fine control over the build of LLVM and enabled sub-projects. Nearly all of these variable names begin with ``LLVM_``. **BUILD_SHARED_LIBS**:BOOL Flag indicating if each LLVM component (e.g. Support) is built as a shared library (ON) or as a static library (OFF). Its default value is OFF. On Windows, shared libraries may be used when building with MinGW, including mingw-w64, but not when building with the Microsoft toolchain. .. note:: BUILD_SHARED_LIBS is only recommended for use by LLVM developers. If you want to build LLVM as a shared library, you should use the ``LLVM_BUILD_LLVM_DYLIB`` option. **LLVM_ABI_BREAKING_CHECKS**:STRING Used to decide if LLVM should be built with ABI breaking checks or not. Allowed values are `WITH_ASSERTS` (default), `FORCE_ON` and `FORCE_OFF`. `WITH_ASSERTS` turns on ABI breaking checks in an assertion enabled build. `FORCE_ON` (`FORCE_OFF`) turns them on (off) irrespective of whether normal (`NDEBUG`-based) assertions are enabled or not. A version of LLVM built with ABI breaking checks is not ABI compatible with a version built without it. **LLVM_ADDITIONAL_BUILD_TYPES**:LIST Adding a semicolon separated list of additional build types to this flag allows for them to be specified as values in CMAKE_BUILD_TYPE without encountering a fatal error during the configuration process. **LLVM_UNREACHABLE_OPTIMIZE**:BOOL This flag controls the behavior of `llvm_unreachable()` in release build (when assertions are disabled in general). When ON (default) then `llvm_unreachable()` is considered "undefined behavior" and optimized as such. When OFF it is instead replaced with a guaranteed "trap". **LLVM_APPEND_VC_REV**:BOOL Embed version control revision info (Git revision id). The version info is provided by the ``LLVM_REVISION`` macro in ``llvm/include/llvm/Support/VCSRevision.h``. Developers using git who don't need revision info can disable this option to avoid re-linking most binaries after a branch switch. Defaults to ON. **LLVM_FORCE_VC_REVISION**:STRING Force a specific Git revision id rather than calling to git to determine it. This is useful in environments where git is not available or non-functional but the VC revision is available through other means. **LLVM_FORCE_VC_REPOSITORY**:STRING Set the git repository to include in version info rather than calling git to determine it. **LLVM_BUILD_32_BITS**:BOOL Build 32-bit executables and libraries on 64-bit systems. This option is available only on some 64-bit Unix systems. Defaults to OFF. **LLVM_BUILD_BENCHMARKS**:BOOL Adds benchmarks to the list of default targets. Defaults to OFF. **LLVM_BUILD_DOCS**:BOOL Adds all *enabled* documentation targets (i.e. Doxgyen and Sphinx targets) as dependencies of the default build targets. This results in all of the (enabled) documentation targets being as part of a normal build. If the ``install`` target is run then this also enables all built documentation targets to be installed. Defaults to OFF. To enable a particular documentation target, see LLVM_ENABLE_SPHINX and LLVM_ENABLE_DOXYGEN. **LLVM_BUILD_EXAMPLES**:BOOL Build LLVM examples. Defaults to OFF. Targets for building each example are generated in any case. See documentation for *LLVM_BUILD_TOOLS* above for more details. **LLVM_BUILD_INSTRUMENTED_COVERAGE**:BOOL If enabled, `source-based code coverage `_ instrumentation is enabled while building llvm. If CMake can locate the code coverage scripts and the llvm-cov and llvm-profdata tools that pair to your compiler, the build will also generate the `generate-coverage-report` target to generate the code coverage report for LLVM, and the `clear-profile-data` utility target to delete captured profile data. See documentation for *LLVM_CODE_COVERAGE_TARGETS* and *LLVM_COVERAGE_SOURCE_DIRS* for more information on configuring code coverage reports. **LLVM_CODE_COVERAGE_TARGETS**:STRING If set to a semicolon separated list of targets, those targets will be used to drive the code coverage reports. If unset, the target list will be constructed using the LLVM build's CMake export list. **LLVM_COVERAGE_SOURCE_DIRS**:STRING If set to a semicolon separated list of directories, the coverage reports will limit code coverage summaries to just the listed directories. If unset, coverage reports will include all sources identified by the tooling. **LLVM_INDIVIDUAL_TEST_COVERAGE**:BOOL Enable individual test case coverage. When set to ON, code coverage data for each test case will be generated and stored in a separate directory under the config.test_exec_root path. This feature allows code coverage analysis of each individual test case. Defaults to OFF. **LLVM_BUILD_LLVM_DYLIB**:BOOL If enabled, the target for building the libLLVM shared library is added. This library contains all of LLVM's components in a single shared library. Defaults to OFF. This cannot be used in conjunction with BUILD_SHARED_LIBS. Tools will only be linked to the libLLVM shared library if LLVM_LINK_LLVM_DYLIB is also ON. The components in the library can be customised by setting LLVM_DYLIB_COMPONENTS to a list of the desired components. This option is not available on Windows. **LLVM_BUILD_TESTS**:BOOL Include LLVM unit tests in the 'all' build target. Defaults to OFF. Targets for building each unit test are generated in any case. You can build a specific unit test using the targets defined under *unittests*, such as ADTTests, IRTests, SupportTests, etc. (Search for ``add_llvm_unittest`` in the subdirectories of *unittests* for a complete list of unit tests.) It is possible to build all unit tests with the target *UnitTests*. **LLVM_BUILD_TOOLS**:BOOL Build LLVM tools. Defaults to ON. Targets for building each tool are generated in any case. You can build a tool separately by invoking its target. For example, you can build *llvm-as* with a Makefile-based system by executing *make llvm-as* at the root of your build directory. **LLVM_CCACHE_BUILD**:BOOL If enabled and the ``ccache`` program is available, then LLVM will be built using ``ccache`` to speed up rebuilds of LLVM and its components. Defaults to OFF. The size and location of the cache maintained by ``ccache`` can be adjusted via the LLVM_CCACHE_MAXSIZE and LLVM_CCACHE_DIR options, which are passed to the CCACHE_MAXSIZE and CCACHE_DIR environment variables, respectively. **LLVM_CREATE_XCODE_TOOLCHAIN**:BOOL macOS Only: If enabled CMake will generate a target named 'install-xcode-toolchain'. This target will create a directory at $CMAKE_INSTALL_PREFIX/Toolchains containing an xctoolchain directory which can be used to override the default system tools. **LLVM__LINKER_FLAGS**:STRING Defines the set of linker flags that should be applied to a . **LLVM_DEFAULT_TARGET_TRIPLE**:STRING LLVM target to use for code generation when no target is explicitly specified. It defaults to "host", meaning that it shall pick the architecture of the machine where LLVM is being built. If you are building a cross-compiler, set it to the target triple of your desired architecture. **LLVM_DOXYGEN_QCH_FILENAME**:STRING The filename of the Qt Compressed Help file that will be generated when ``-DLLVM_ENABLE_DOXYGEN=ON`` and ``-DLLVM_ENABLE_DOXYGEN_QT_HELP=ON`` are given. Defaults to ``org.llvm.qch``. This option is only useful in combination with ``-DLLVM_ENABLE_DOXYGEN_QT_HELP=ON``; otherwise it has no effect. **LLVM_DOXYGEN_QHELPGENERATOR_PATH**:STRING The path to the ``qhelpgenerator`` executable. Defaults to whatever CMake's ``find_program()`` can find. This option is only useful in combination with ``-DLLVM_ENABLE_DOXYGEN_QT_HELP=ON``; otherwise it has no effect. **LLVM_DOXYGEN_QHP_CUST_FILTER_NAME**:STRING See `Qt Help Project`_ for more information. Defaults to the CMake variable ``${PACKAGE_STRING}`` which is a combination of the package name and version string. This filter can then be used in Qt Creator to select only documentation from LLVM when browsing through all the help files that you might have loaded. This option is only useful in combination with ``-DLLVM_ENABLE_DOXYGEN_QT_HELP=ON``; otherwise it has no effect. .. _Qt Help Project: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-filters **LLVM_DOXYGEN_QHP_NAMESPACE**:STRING Namespace under which the intermediate Qt Help Project file lives. See `Qt Help Project`_ for more information. Defaults to "org.llvm". This option is only useful in combination with ``-DLLVM_ENABLE_DOXYGEN_QT_HELP=ON``; otherwise it has no effect. **LLVM_DOXYGEN_SVG**:BOOL Uses .svg files instead of .png files for graphs in the Doxygen output. Defaults to OFF. .. _llvm_enable_assertions: **LLVM_ENABLE_ASSERTIONS**:BOOL Enables code assertions. Defaults to ON if and only if ``CMAKE_BUILD_TYPE`` is *Debug*. **LLVM_ENABLE_BINDINGS**:BOOL If disabled, do not try to build the OCaml bindings. **LLVM_ENABLE_DIA_SDK**:BOOL Enable building with MSVC DIA SDK for PDB debugging support. Available only with MSVC. Defaults to ON. **LLVM_ENABLE_DOXYGEN**:BOOL Enables the generation of browsable HTML documentation using doxygen. Defaults to OFF. **LLVM_ENABLE_DOXYGEN_QT_HELP**:BOOL Enables the generation of a Qt Compressed Help file. Defaults to OFF. This affects the make target ``doxygen-llvm``. When enabled, apart from the normal HTML output generated by doxygen, this will produce a QCH file named ``org.llvm.qch``. You can then load this file into Qt Creator. This option is only useful in combination with ``-DLLVM_ENABLE_DOXYGEN=ON``; otherwise this has no effect. **LLVM_ENABLE_EH**:BOOL Build LLVM with exception-handling support. This is necessary if you wish to link against LLVM libraries and make use of C++ exceptions in your own code that need to propagate through LLVM code. Defaults to OFF. **LLVM_ENABLE_EXPENSIVE_CHECKS**:BOOL Enable additional time/memory expensive checking. Defaults to OFF. **LLVM_ENABLE_HTTPLIB**:BOOL Enables the optional cpp-httplib dependency which is used by llvm-debuginfod to serve debug info over HTTP. `cpp-httplib `_ must be installed, or `httplib_ROOT` must be set. Defaults to OFF. **LLVM_ENABLE_FFI**:BOOL Indicates whether the LLVM Interpreter will be linked with the Foreign Function Interface library (libffi) in order to enable calling external functions. If the library or its headers are installed in a custom location, you can also set the variables FFI_INCLUDE_DIR and FFI_LIBRARY_DIR to the directories where ffi.h and libffi.so can be found, respectively. Defaults to OFF. **LLVM_ENABLE_IDE**:BOOL Tell the build system that an IDE is being used. This in turn disables the creation of certain convenience build system targets, such as the various ``install-*`` and ``check-*`` targets, since IDEs don't always deal well with a large number of targets. This is usually autodetected, but it can be configured manually to explicitly control the generation of those targets. **LLVM_ENABLE_LIBCXX**:BOOL If the host compiler and linker supports the stdlib flag, -stdlib=libc++ is passed to invocations of both so that the project is built using libc++ instead of stdlibc++. Defaults to OFF. **LLVM_ENABLE_LLVM_LIBC**: BOOL If the LLVM libc overlay is installed in a location where the host linker can access it, all built executables will be linked against the LLVM libc overlay before linking against the system libc. Defaults to OFF. **LLVM_ENABLE_LIBPFM**:BOOL Enable building with libpfm to support hardware counter measurements in LLVM tools. Defaults to ON. **LLVM_ENABLE_LLD**:BOOL This option is equivalent to `-DLLVM_USE_LINKER=lld`, except during a 2-stage build where a dependency is added from the first stage to the second ensuring that lld is built before stage2 begins. **LLVM_ENABLE_LTO**:STRING Add ``-flto`` or ``-flto=`` flags to the compile and link command lines, enabling link-time optimization. Possible values are ``Off``, ``On``, ``Thin`` and ``Full``. Defaults to OFF. **LLVM_ENABLE_MODULES**:BOOL Compile with `Clang Header Modules `_. **LLVM_ENABLE_PEDANTIC**:BOOL Enable pedantic mode. This disables compiler-specific extensions, if possible. Defaults to ON. **LLVM_ENABLE_PIC**:BOOL Add the ``-fPIC`` flag to the compiler command-line, if the compiler supports this flag. Some systems, like Windows, do not need this flag. Defaults to ON. **LLVM_ENABLE_PROJECTS**:STRING Semicolon-separated list of projects to build, or *all* for building all (clang, lldb, lld, polly, etc) projects. This flag assumes that projects are checked out side-by-side and not nested, i.e. clang needs to be in parallel of llvm instead of nested in `llvm/tools`. This feature allows to have one build for only LLVM and another for clang+llvm using the same source checkout. The full list is: ``clang;clang-tools-extra;cross-project-tests;libc;libclc;lld;lldb;openmp;polly;pstl`` **LLVM_ENABLE_RUNTIMES**:STRING Build libc++, libc++abi, libunwind or compiler-rt using the just-built compiler. This is the correct way to build runtimes when putting together a toolchain. It will build the builtins separately from the other runtimes to preserve correct dependency ordering. If you want to build the runtimes using a system compiler, see the `libc++ documentation `_. Note: the list should not have duplicates with `LLVM_ENABLE_PROJECTS`. The full list is: ``compiler-rt;libc;libcxx;libcxxabi;libunwind;openmp`` To enable all of them, use: ``LLVM_ENABLE_RUNTIMES=all`` **LLVM_ENABLE_RTTI**:BOOL Build LLVM with run-time type information. Defaults to OFF. **LLVM_ENABLE_SPHINX**:BOOL If specified, CMake will search for the ``sphinx-build`` executable and will make the ``SPHINX_OUTPUT_HTML`` and ``SPHINX_OUTPUT_MAN`` CMake options available. Defaults to OFF. **LLVM_ENABLE_THREADS**:BOOL Build with threads support, if available. Defaults to ON. **LLVM_ENABLE_UNWIND_TABLES**:BOOL Enable unwind tables in the binary. Disabling unwind tables can reduce the size of the libraries. Defaults to ON. **LLVM_ENABLE_WARNINGS**:BOOL Enable all compiler warnings. Defaults to ON. **LLVM_ENABLE_WERROR**:BOOL Stop and fail the build, if a compiler warning is triggered. Defaults to OFF. **LLVM_ENABLE_Z3_SOLVER**:BOOL If enabled, the Z3 constraint solver is activated for the Clang static analyzer. A recent version of the z3 library needs to be available on the system. **LLVM_ENABLE_ZLIB**:STRING Used to decide if LLVM tools should support compression/decompression with zlib. Allowed values are ``OFF``, ``ON`` (default, enable if zlib is found), and ``FORCE_ON`` (error if zlib is not found). **LLVM_ENABLE_ZSTD**:STRING Used to decide if LLVM tools should support compression/decompression with zstd. Allowed values are ``OFF``, ``ON`` (default, enable if zstd is found), and ``FORCE_ON`` (error if zstd is not found). **LLVM_EXPERIMENTAL_TARGETS_TO_BUILD**:STRING Semicolon-separated list of experimental targets to build and linked into llvm. This will build the experimental target without needing it to add to the list of all the targets available in the LLVM's main CMakeLists.txt. **LLVM_EXTERNAL_{CLANG,LLD,POLLY}_SOURCE_DIR**:PATH These variables specify the path to the source directory for the external LLVM projects Clang, lld, and Polly, respectively, relative to the top-level source directory. If the in-tree subdirectory for an external project exists (e.g., llvm/tools/clang for Clang), then the corresponding variable will not be used. If the variable for an external project does not point to a valid path, then that project will not be built. **LLVM_EXTERNAL_PROJECTS**:STRING Semicolon-separated list of additional external projects to build as part of llvm. For each project LLVM_EXTERNAL__SOURCE_DIR have to be specified with the path for the source code of the project. Example: ``-DLLVM_EXTERNAL_PROJECTS="Foo;Bar" -DLLVM_EXTERNAL_FOO_SOURCE_DIR=/src/foo -DLLVM_EXTERNAL_BAR_SOURCE_DIR=/src/bar``. **LLVM_EXTERNALIZE_DEBUGINFO**:BOOL Generate dSYM files and strip executables and libraries (Darwin Only). Defaults to OFF. **LLVM_FORCE_USE_OLD_TOOLCHAIN**:BOOL If enabled, the compiler and standard library versions won't be checked. LLVM may not compile at all, or might fail at runtime due to known bugs in these toolchains. **LLVM_INCLUDE_BENCHMARKS**:BOOL Generate build targets for the LLVM benchmarks. Defaults to ON. **LLVM_INCLUDE_EXAMPLES**:BOOL Generate build targets for the LLVM examples. Defaults to ON. You can use this option to disable the generation of build targets for the LLVM examples. **LLVM_INCLUDE_TESTS**:BOOL Generate build targets for the LLVM unit tests. Defaults to ON. You can use this option to disable the generation of build targets for the LLVM unit tests. **LLVM_INCLUDE_TOOLS**:BOOL Generate build targets for the LLVM tools. Defaults to ON. You can use this option to disable the generation of build targets for the LLVM tools. **LLVM_INSTALL_BINUTILS_SYMLINKS**:BOOL Install symlinks from the binutils tool names to the corresponding LLVM tools. For example, ar will be symlinked to llvm-ar. **LLVM_INSTALL_CCTOOLS_SYMLINKS**:BOOL Install symliks from the cctools tool names to the corresponding LLVM tools. For example, lipo will be symlinked to llvm-lipo. **LLVM_INSTALL_OCAMLDOC_HTML_DIR**:STRING The path to install OCamldoc-generated HTML documentation to. This path can either be absolute or relative to the CMAKE_INSTALL_PREFIX. Defaults to ``${CMAKE_INSTALL_DOCDIR}/llvm/ocaml-html``. **LLVM_INSTALL_SPHINX_HTML_DIR**:STRING The path to install Sphinx-generated HTML documentation to. This path can either be absolute or relative to the CMAKE_INSTALL_PREFIX. Defaults to ``${CMAKE_INSTALL_DOCDIR}/llvm/html``. **LLVM_INSTALL_UTILS**:BOOL If enabled, utility binaries like ``FileCheck`` and ``not`` will be installed to CMAKE_INSTALL_PREFIX. **LLVM_INTEGRATED_CRT_ALLOC**:PATH On Windows, allows embedding a different C runtime allocator into the LLVM tools and libraries. Using a lock-free allocator such as the ones listed below greatly decreases ThinLTO link time by about an order of magnitude. It also midly improves Clang build times, by about 5-10%. At the moment, rpmalloc, snmalloc and mimalloc are supported. Use the path to `git clone` to select the respective allocator, for example: .. code-block:: console $ D:\git> git clone https://github.com/mjansson/rpmalloc $ D:\llvm-project> cmake ... -DLLVM_INTEGRATED_CRT_ALLOC=D:\git\rpmalloc This flag needs to be used along with the static CRT, ie. if building the Release target, add -DCMAKE_MSVC_RUNTIME_LIBRARY=MultiThreaded. **LLVM_INSTALL_DOXYGEN_HTML_DIR**:STRING The path to install Doxygen-generated HTML documentation to. This path can either be absolute or relative to the *CMAKE_INSTALL_PREFIX*. Defaults to ``${CMAKE_INSTALL_DOCDIR}/llvm/doxygen-html``. **LLVM_LINK_LLVM_DYLIB**:BOOL If enabled, tools will be linked with the libLLVM shared library. Defaults to OFF. Setting LLVM_LINK_LLVM_DYLIB to ON also sets LLVM_BUILD_LLVM_DYLIB to ON. This option is not available on Windows. **LLVM_LIT_ARGS**:STRING Arguments given to lit. ``make check`` and ``make clang-test`` are affected. By default, ``'-sv --no-progress-bar'`` on Visual C++ and Xcode, ``'-sv'`` on others. **LLVM_LIT_TOOLS_DIR**:PATH The path to GnuWin32 tools for tests. Valid on Windows host. Defaults to the empty string, in which case lit will look for tools needed for tests (e.g. ``grep``, ``sort``, etc.) in your %PATH%. If GnuWin32 is not in your %PATH%, then you can set this variable to the GnuWin32 directory so that lit can find tools needed for tests in that directory. **LLVM_NATIVE_TOOL_DIR**:STRING Full path to a directory containing executables for the build host (containing binaries such as ``llvm-tblgen`` and ``clang-tblgen``). This is intended for cross-compiling: if the user sets this variable and the directory contains executables with the expected names, no separate native versions of those executables will be built. **LLVM_NO_INSTALL_NAME_DIR_FOR_BUILD_TREE**:BOOL Defaults to ``OFF``. If set to ``ON``, CMake's default logic for library IDs on Darwin in the build tree will be used. Otherwise the install-time library IDs will be used in the build tree as well. Mainly useful when other CMake library ID control variables (e.g., ``CMAKE_INSTALL_NAME_DIR``) are being set to non-standard values. **LLVM_OPTIMIZED_TABLEGEN**:BOOL If enabled and building a debug or asserts build the CMake build system will generate a Release build tree to build a fully optimized tablegen for use during the build. Enabling this option can significantly speed up build times especially when building LLVM in Debug configurations. **LLVM_PARALLEL_COMPILE_JOBS**:STRING Define the maximum number of concurrent compilation jobs. **LLVM_PARALLEL_LINK_JOBS**:STRING Define the maximum number of concurrent link jobs. **LLVM_PARALLEL_TABLEGEN_JOBS**:STRING Define the maximum number of concurrent tablegen jobs. **LLVM_RAM_PER_COMPILE_JOB**:STRING Calculates the amount of Ninja compile jobs according to available resources. Value has to be in MB, overwrites LLVM_PARALLEL_COMPILE_JOBS. Compile jobs will be between one and amount of logical cores. **LLVM_RAM_PER_LINK_JOB**:STRING Calculates the amount of Ninja link jobs according to available resources. Value has to be in MB, overwrites LLVM_PARALLEL_LINK_JOBS. Link jobs will be between one and amount of logical cores. Link jobs will not run exclusively therefore you should add an offset of one or two compile jobs to be sure its not terminated in your memory restricted environment. On ELF platforms also consider ``LLVM_USE_SPLIT_DWARF`` in Debug build. **LLVM_RAM_PER_TABLEGEN_JOB**:STRING Calculates the amount of Ninja tablegen jobs according to available resources. Value has to be in MB, overwrites LLVM_PARALLEL_TABLEGEN_JOBS. Tablegen jobs will be between one and amount of logical cores. **LLVM_PROFDATA_FILE**:PATH Path to a profdata file to pass into clang's -fprofile-instr-use flag. This can only be specified if you're building with clang. **LLVM_REVERSE_ITERATION**:BOOL If enabled, all supported unordered llvm containers would be iterated in reverse order. This is useful for uncovering non-determinism caused by iteration of unordered containers. **LLVM_STATIC_LINK_CXX_STDLIB**:BOOL Statically link to the C++ standard library if possible. This uses the flag "-static-libstdc++", but a Clang host compiler will statically link to libc++ if used in conjunction with the **LLVM_ENABLE_LIBCXX** flag. Defaults to OFF. **LLVM_TABLEGEN**:STRING Full path to a native TableGen executable (usually named ``llvm-tblgen``). This is intended for cross-compiling: if the user sets this variable, no native TableGen will be created. **LLVM_TARGET_ARCH**:STRING LLVM target to use for native code generation. This is required for JIT generation. It defaults to "host", meaning that it shall pick the architecture of the machine where LLVM is being built. If you are cross-compiling, set it to the target architecture name. **LLVM_TARGETS_TO_BUILD**:STRING Semicolon-separated list of targets to build, or *all* for building all targets. Case-sensitive. Defaults to *all*. Example: ``-DLLVM_TARGETS_TO_BUILD="X86;PowerPC"``. The full list, as of March 2023, is: ``AArch64;AMDGPU;ARM;AVR;BPF;Hexagon;Lanai;LoongArch;Mips;MSP430;NVPTX;PowerPC;RISCV;Sparc;SystemZ;VE;WebAssembly;X86;XCore`` **LLVM_TEMPORARILY_ALLOW_OLD_TOOLCHAIN**:BOOL If enabled, the compiler version check will only warn when using a toolchain which is about to be deprecated, instead of emitting an error. **LLVM_UBSAN_FLAGS**:STRING Defines the set of compile flags used to enable UBSan. Only used if ``LLVM_USE_SANITIZER`` contains ``Undefined``. This can be used to override the default set of UBSan flags. **LLVM_USE_INTEL_JITEVENTS**:BOOL Enable building support for Intel JIT Events API. Defaults to OFF. **LLVM_USE_LINKER**:STRING Add ``-fuse-ld={name}`` to the link invocation. The possible value depend on your compiler, for clang the value can be an absolute path to your custom linker, otherwise clang will prefix the name with ``ld.`` and apply its usual search. For example to link LLVM with the Gold linker, cmake can be invoked with ``-DLLVM_USE_LINKER=gold``. **LLVM_USE_OPROFILE**:BOOL Enable building OProfile JIT support. Defaults to OFF. **LLVM_USE_PERF**:BOOL Enable building support for Perf (linux profiling tool) JIT support. Defaults to OFF. **LLVM_USE_RELATIVE_PATHS_IN_FILES**:BOOL Rewrite absolute source paths in sources and debug info to relative ones. The source prefix can be adjusted via the LLVM_SOURCE_PREFIX variable. **LLVM_USE_RELATIVE_PATHS_IN_DEBUG_INFO**:BOOL Rewrite absolute source paths in debug info to relative ones. The source prefix can be adjusted via the LLVM_SOURCE_PREFIX variable. **LLVM_USE_SANITIZER**:STRING Define the sanitizer used to build LLVM binaries and tests. Possible values are ``Address``, ``Memory``, ``MemoryWithOrigins``, ``Undefined``, ``Thread``, ``DataFlow``, and ``Address;Undefined``. Defaults to empty string. **LLVM_USE_SPLIT_DWARF**:BOOL If enabled CMake will pass ``-gsplit-dwarf`` to the compiler. This option reduces link-time memory usage by reducing the amount of debug information that the linker needs to resolve. It is recommended for platforms using the ELF object format, like Linux systems when linker memory usage is too high. **SPHINX_EXECUTABLE**:STRING The path to the ``sphinx-build`` executable detected by CMake. For installation instructions, see https://www.sphinx-doc.org/en/master/usage/installation.html **SPHINX_OUTPUT_HTML**:BOOL If enabled (and ``LLVM_ENABLE_SPHINX`` is enabled) then the targets for building the documentation as html are added (but not built by default unless ``LLVM_BUILD_DOCS`` is enabled). There is a target for each project in the source tree that uses sphinx (e.g. ``docs-llvm-html``, ``docs-clang-html`` and ``docs-lld-html``). Defaults to ON. **SPHINX_OUTPUT_MAN**:BOOL If enabled (and ``LLVM_ENABLE_SPHINX`` is enabled) the targets for building the man pages are added (but not built by default unless ``LLVM_BUILD_DOCS`` is enabled). Currently the only target added is ``docs-llvm-man``. Defaults to ON. **SPHINX_WARNINGS_AS_ERRORS**:BOOL If enabled then sphinx documentation warnings will be treated as errors. Defaults to ON. Advanced variables ~~~~~~~~~~~~~~~~~~ These are niche, and changing them from their defaults is more likely to cause things to go wrong. They are also unstable across LLVM versions. **LLVM_TOOLS_INSTALL_DIR**:STRING The path to install the main LLVM tools, relative to the *CMAKE_INSTALL_PREFIX*. Defaults to *CMAKE_INSTALL_BINDIR*. **LLVM_UTILS_INSTALL_DIR**:STRING The path to install auxiliary LLVM utilities, relative to the *CMAKE_INSTALL_PREFIX*. Only matters if *LLVM_INSTALL_UTILS* is enabled. Defaults to *LLVM_TOOLS_INSTALL_DIR*. **LLVM_EXAMPLES_INSTALL_DIR**:STRING The path for examples of using LLVM, relative to the *CMAKE_INSTALL_PREFIX*. Only matters if *LLVM_BUILD_EXAMPLES* is enabled. Defaults to "examples". CMake Caches ============ Recently LLVM and Clang have been adding some more complicated build system features. Utilizing these new features often involves a complicated chain of CMake variables passed on the command line. Clang provides a collection of CMake cache scripts to make these features more approachable. CMake cache files are utilized using CMake's -C flag: .. code-block:: console $ cmake -C CMake cache scripts are processed in an isolated scope, only cached variables remain set when the main configuration runs. CMake cached variables do not reset variables that are already set unless the FORCE option is specified. A few notes about CMake Caches: - Order of command line arguments is important - -D arguments specified before -C are set before the cache is processed and can be read inside the cache file - -D arguments specified after -C are set after the cache is processed and are unset inside the cache file - All -D arguments will override cache file settings - CMAKE_TOOLCHAIN_FILE is evaluated after both the cache file and the command line arguments - It is recommended that all -D options should be specified *before* -C For more information about some of the advanced build configurations supported via Cache files see :doc:`AdvancedBuilds`. Executing the Tests =================== Testing is performed when the *check-all* target is built. For instance, if you are using Makefiles, execute this command in the root of your build directory: .. code-block:: console $ make check-all On Visual Studio, you may run tests by building the project "check-all". For more information about testing, see the :doc:`TestingGuide`. Cross compiling =============== See `this wiki page `_ for generic instructions on how to cross-compile with CMake. It goes into detailed explanations and may seem daunting, but it is not. On the wiki page there are several examples including toolchain files. Go directly to the ``Information how to set up various cross compiling toolchains`` section for a quick solution. Also see the `LLVM-related variables`_ section for variables used when cross-compiling. Embedding LLVM in your project ============================== From LLVM 3.5 onwards the CMake build system exports LLVM libraries as importable CMake targets. This means that clients of LLVM can now reliably use CMake to develop their own LLVM-based projects against an installed version of LLVM regardless of how it was built. Here is a simple example of a CMakeLists.txt file that imports the LLVM libraries and uses them to build a simple application ``simple-tool``. .. code-block:: cmake cmake_minimum_required(VERSION 3.20.0) project(SimpleProject) find_package(LLVM REQUIRED CONFIG) message(STATUS "Found LLVM ${LLVM_PACKAGE_VERSION}") message(STATUS "Using LLVMConfig.cmake in: ${LLVM_DIR}") # Set your project compile flags. # E.g. if using the C++ header files # you will need to enable C++11 support # for your compiler. include_directories(${LLVM_INCLUDE_DIRS}) separate_arguments(LLVM_DEFINITIONS_LIST NATIVE_COMMAND ${LLVM_DEFINITIONS}) add_definitions(${LLVM_DEFINITIONS_LIST}) # Now build our tools add_executable(simple-tool tool.cpp) # Find the libraries that correspond to the LLVM components # that we wish to use llvm_map_components_to_libnames(llvm_libs support core irreader) # Link against LLVM libraries target_link_libraries(simple-tool ${llvm_libs}) The ``find_package(...)`` directive when used in CONFIG mode (as in the above example) will look for the ``LLVMConfig.cmake`` file in various locations (see cmake manual for details). It creates a ``LLVM_DIR`` cache entry to save the directory where ``LLVMConfig.cmake`` is found or allows the user to specify the directory (e.g. by passing ``-DLLVM_DIR=/usr/lib/cmake/llvm`` to the ``cmake`` command or by setting it directly in ``ccmake`` or ``cmake-gui``). This file is available in two different locations. * ``/LLVMConfig.cmake`` where ```` is the location where LLVM CMake modules are installed as part of an installed version of LLVM. This is typically ``cmake/llvm/`` within the lib directory. On Linux, this is typically ``/usr/lib/cmake/llvm/LLVMConfig.cmake``. * ``/lib/cmake/llvm/LLVMConfig.cmake`` where ```` is the root of the LLVM build tree. **Note: this is only available when building LLVM with CMake.** If LLVM is installed in your operating system's normal installation prefix (e.g. on Linux this is usually ``/usr/``) ``find_package(LLVM ...)`` will automatically find LLVM if it is installed correctly. If LLVM is not installed or you wish to build directly against the LLVM build tree you can use ``LLVM_DIR`` as previously mentioned. The ``LLVMConfig.cmake`` file sets various useful variables. Notable variables include ``LLVM_CMAKE_DIR`` The path to the LLVM CMake directory (i.e. the directory containing LLVMConfig.cmake). ``LLVM_DEFINITIONS`` A list of preprocessor defines that should be used when building against LLVM. ``LLVM_ENABLE_ASSERTIONS`` This is set to ON if LLVM was built with assertions, otherwise OFF. ``LLVM_ENABLE_EH`` This is set to ON if LLVM was built with exception handling (EH) enabled, otherwise OFF. ``LLVM_ENABLE_RTTI`` This is set to ON if LLVM was built with run time type information (RTTI), otherwise OFF. ``LLVM_INCLUDE_DIRS`` A list of include paths to directories containing LLVM header files. ``LLVM_PACKAGE_VERSION`` The LLVM version. This string can be used with CMake conditionals, e.g., ``if (${LLVM_PACKAGE_VERSION} VERSION_LESS "3.5")``. ``LLVM_TOOLS_BINARY_DIR`` The path to the directory containing the LLVM tools (e.g. ``llvm-as``). Notice that in the above example we link ``simple-tool`` against several LLVM libraries. The list of libraries is determined by using the ``llvm_map_components_to_libnames()`` CMake function. For a list of available components look at the output of running ``llvm-config --components``. Note that for LLVM < 3.5 ``llvm_map_components_to_libraries()`` was used instead of ``llvm_map_components_to_libnames()``. This is now deprecated and will be removed in a future version of LLVM. .. _cmake-out-of-source-pass: Developing LLVM passes out of source ------------------------------------ It is possible to develop LLVM passes out of LLVM's source tree (i.e. against an installed or built LLVM). An example of a project layout is provided below. .. code-block:: none / | CMakeLists.txt / | CMakeLists.txt Pass.cpp ... Contents of ``/CMakeLists.txt``: .. code-block:: cmake find_package(LLVM REQUIRED CONFIG) separate_arguments(LLVM_DEFINITIONS_LIST NATIVE_COMMAND ${LLVM_DEFINITIONS}) add_definitions(${LLVM_DEFINITIONS_LIST}) include_directories(${LLVM_INCLUDE_DIRS}) add_subdirectory() Contents of ``//CMakeLists.txt``: .. code-block:: cmake add_library(LLVMPassname MODULE Pass.cpp) Note if you intend for this pass to be merged into the LLVM source tree at some point in the future it might make more sense to use LLVM's internal ``add_llvm_library`` function with the MODULE argument instead by... Adding the following to ``/CMakeLists.txt`` (after ``find_package(LLVM ...)``) .. code-block:: cmake list(APPEND CMAKE_MODULE_PATH "${LLVM_CMAKE_DIR}") include(AddLLVM) And then changing ``//CMakeLists.txt`` to .. code-block:: cmake add_llvm_library(LLVMPassname MODULE Pass.cpp ) When you are done developing your pass, you may wish to integrate it into the LLVM source tree. You can achieve it in two easy steps: #. Copying ```` folder into ``/lib/Transforms`` directory. #. Adding ``add_subdirectory()`` line into ``/lib/Transforms/CMakeLists.txt``. Compiler/Platform-specific topics ================================= Notes for specific compilers and/or platforms. Windows ------- **LLVM_COMPILER_JOBS**:STRING Specifies the maximum number of parallel compiler jobs to use per project when building with msbuild or Visual Studio. Only supported for the Visual Studio 2010 CMake generator. 0 means use all processors. Default is 0. **CMAKE_MT**:STRING When compiling with clang-cl, recent CMake versions will default to selecting `llvm-mt` as the Manifest Tool instead of Microsoft's `mt.exe`. This will often cause errors like: .. code-block:: console -- Check for working C compiler: [...]clang-cl.exe - broken [...] MT: command [...] failed (exit code 0x1) with the following output: llvm-mt: error: no libxml2 ninja: build stopped: subcommand failed. To work around this error, set `CMAKE_MT=mt`.