An extension of the inner loop vectorizer that creates a skeleton for a vectorized loop that has its epilogue (residual) also vectorized. More...

Inheritance diagram for llvm::InnerLoopAndEpilogueVectorizer:

[legend]

Public Member Functions
	InnerLoopAndEpilogueVectorizer (Loop OrigLoop, PredicatedScalarEvolution &PSE, LoopInfo LI, DominatorTree DT, const TargetLibraryInfo TLI, const TargetTransformInfo TTI, AssumptionCache AC, OptimizationRemarkEmitter ORE, EpilogueLoopVectorizationInfo &EPI, LoopVectorizationLegality LVL, llvm::LoopVectorizationCostModel CM, BlockFrequencyInfo BFI, ProfileSummaryInfo *PSI, GeneratedRTChecks &Checks)

std::pair< BasicBlock , Value >	createVectorizedLoopSkeleton (const SCEV2ValueTy &ExpandedSCEVs) final
	Create a new empty loop that will contain vectorized instructions later on, while the old loop will be used as the scalar remainder.

virtual std::pair< BasicBlock , Value >	createEpilogueVectorizedLoopSkeleton (const SCEV2ValueTy &ExpandedSCEVs)=0
	The interface for creating a vectorized skeleton using one of two different strategies, each corresponding to one execution of the vplan as described above.

Public Member Functions inherited from llvm::InnerLoopVectorizer
	InnerLoopVectorizer (Loop OrigLoop, PredicatedScalarEvolution &PSE, LoopInfo LI, DominatorTree DT, const TargetLibraryInfo TLI, const TargetTransformInfo TTI, AssumptionCache AC, OptimizationRemarkEmitter ORE, ElementCount VecWidth, ElementCount MinProfitableTripCount, unsigned UnrollFactor, LoopVectorizationLegality LVL, LoopVectorizationCostModel CM, BlockFrequencyInfo BFI, ProfileSummaryInfo *PSI, GeneratedRTChecks &RTChecks)

virtual	~InnerLoopVectorizer ()=default

virtual std::pair< BasicBlock , Value >	createVectorizedLoopSkeleton (const SCEV2ValueTy &ExpandedSCEVs)
	Create a new empty loop that will contain vectorized instructions later on, while the old loop will be used as the scalar remainder.

void	fixVectorizedLoop (VPTransformState &State, VPlan &Plan)
	Fix the vectorized code, taking care of header phi's, live-outs, and more.

bool	areSafetyChecksAdded ()

void	scalarizeInstruction (const Instruction Instr, VPReplicateRecipe RepRecipe, const VPIteration &Instance, VPTransformState &State)
	A helper function to scalarize a single Instruction in the innermost loop.

void	fixNonInductionPHIs (VPlan &Plan, VPTransformState &State)
	Fix the non-induction PHIs in `Plan`.

PHINode *	createInductionResumeValue (PHINode OrigPhi, const InductionDescriptor &ID, Value Step, ArrayRef< BasicBlock * > BypassBlocks, std::pair< BasicBlock , Value > AdditionalBypass={nullptr, nullptr})
	Create a new phi node for the induction variable `OrigPhi` to resume iteration count in the scalar epilogue, from where the vectorized loop left off.

Value *	getTripCount () const
	Returns the original loop trip count.

void	setTripCount (Value *TC)
	Used to set the trip count after ILV's construction and after the preheader block has been executed.

Public Attributes
EpilogueLoopVectorizationInfo &	EPI
	Holds and updates state information required to vectorize the main loop and its epilogue in two separate passes.

Additional Inherited Members
Protected Types inherited from llvm::InnerLoopVectorizer
using	PhiVector = SmallVector< PHINode *, 4 >
	A small list of PHINodes.

using	ScalarParts = SmallVector< SmallVector< Value *, 4 >, 2 >
	A type for scalarized values in the new loop.

Protected Member Functions inherited from llvm::InnerLoopVectorizer
void	fixupIVUsers (PHINode OrigPhi, const InductionDescriptor &II, Value VectorTripCount, Value EndValue, BasicBlock MiddleBlock, BasicBlock *VectorHeader, VPlan &Plan, VPTransformState &State)
	Set up the values of the IVs correctly when exiting the vector loop.

void	sinkScalarOperands (Instruction *PredInst)
	Iteratively sink the scalarized operands of a predicated instruction into the block that was created for it.

Value *	getOrCreateVectorTripCount (BasicBlock *InsertBlock)
	Returns (and creates if needed) the trip count of the widened loop.

void	emitIterationCountCheck (BasicBlock *Bypass)
	Emit a bypass check to see if the vector trip count is zero, including if it overflows.

BasicBlock *	emitSCEVChecks (BasicBlock *Bypass)
	Emit a bypass check to see if all of the SCEV assumptions we've had to make are correct.

BasicBlock *	emitMemRuntimeChecks (BasicBlock *Bypass)
	Emit bypass checks to check any memory assumptions we may have made.

void	createVectorLoopSkeleton (StringRef Prefix)
	Emit basic blocks (prefixed with `Prefix`) for the iteration check, vector loop preheader, middle block and scalar preheader.

void	createInductionResumeValues (const SCEV2ValueTy &ExpandedSCEVs, std::pair< BasicBlock , Value > AdditionalBypass={nullptr, nullptr})
	Create new phi nodes for the induction variables to resume iteration count in the scalar epilogue, from where the vectorized loop left off.

BasicBlock *	completeLoopSkeleton ()
	Complete the loop skeleton by adding debug MDs, creating appropriate conditional branches in the middle block, preparing the builder and running the verifier.

virtual void	printDebugTracesAtStart ()
	Allow subclasses to override and print debug traces before/after vplan execution, when trace information is requested.

virtual void	printDebugTracesAtEnd ()

Protected Attributes inherited from llvm::InnerLoopVectorizer
Loop *	OrigLoop
	The original loop.

PredicatedScalarEvolution &	PSE
	A wrapper around ScalarEvolution used to add runtime SCEV checks.

LoopInfo *	LI
	Loop Info.

DominatorTree *	DT
	Dominator Tree.

const TargetLibraryInfo *	TLI
	Target Library Info.

const TargetTransformInfo *	TTI
	Target Transform Info.

AssumptionCache *	AC
	Assumption Cache.

OptimizationRemarkEmitter *	ORE
	Interface to emit optimization remarks.

ElementCount	VF
	The vectorization SIMD factor to use.

ElementCount	MinProfitableTripCount

unsigned	UF
	The vectorization unroll factor to use.

IRBuilder	Builder
	The builder that we use.

BasicBlock *	LoopVectorPreHeader
	The vector-loop preheader.

BasicBlock *	LoopScalarPreHeader
	The scalar-loop preheader.

BasicBlock *	LoopMiddleBlock
	Middle Block between the vector and the scalar.

BasicBlock *	LoopExitBlock
	The unique ExitBlock of the scalar loop if one exists.

BasicBlock *	LoopScalarBody
	The scalar loop body.

SmallVector< BasicBlock *, 4 >	LoopBypassBlocks
	A list of all bypass blocks. The first block is the entry of the loop.

SmallVector< Instruction *, 4 >	PredicatedInstructions
	Store instructions that were predicated.

Value *	TripCount = nullptr
	Trip count of the original loop.

Value *	VectorTripCount = nullptr
	Trip count of the widened loop (TripCount - TripCount % (VF*UF))

LoopVectorizationLegality *	Legal
	The legality analysis.

LoopVectorizationCostModel *	Cost
	The profitablity analysis.

bool	AddedSafetyChecks = false

DenseMap< PHINode , Value >	IVEndValues

BlockFrequencyInfo *	BFI
	BFI and PSI are used to check for profile guided size optimizations.

ProfileSummaryInfo *	PSI

bool	OptForSizeBasedOnProfile

GeneratedRTChecks &	RTChecks
	Structure to hold information about generated runtime checks, responsible for cleaning the checks, if vectorization turns out unprofitable.

SmallMapVector< const RecurrenceDescriptor , PHINode , 4 >	ReductionResumeValues

Detailed Description

An extension of the inner loop vectorizer that creates a skeleton for a vectorized loop that has its epilogue (residual) also vectorized.

The idea is to run the vplan on a given loop twice, firstly to setup the skeleton and vectorize the main loop, and secondly to complete the skeleton from the first step and vectorize the epilogue. This is achieved by deriving two concrete strategy classes from this base class and invoking them in succession from the loop vectorizer planner.

Definition at line 750 of file LoopVectorize.cpp.

Constructor & Destructor Documentation

◆ InnerLoopAndEpilogueVectorizer()

llvm::InnerLoopAndEpilogueVectorizer::InnerLoopAndEpilogueVectorizer	(	Loop *	OrigLoop,
		PredicatedScalarEvolution &	PSE,
		LoopInfo *	LI,
		DominatorTree *	DT,
		const TargetLibraryInfo *	TLI,
		const TargetTransformInfo *	TTI,
		AssumptionCache *	AC,
		OptimizationRemarkEmitter *	ORE,
		EpilogueLoopVectorizationInfo &	EPI,
		LoopVectorizationLegality *	LVL,
		llvm::LoopVectorizationCostModel *	CM,
		BlockFrequencyInfo *	BFI,
		ProfileSummaryInfo *	PSI,
		GeneratedRTChecks &	Checks
	)

inline

Definition at line 752 of file LoopVectorize.cpp.

Member Function Documentation

◆ createEpilogueVectorizedLoopSkeleton()

virtual std::pair< BasicBlock *, Value * > llvm::InnerLoopAndEpilogueVectorizer::createEpilogueVectorizedLoopSkeleton ( const SCEV2ValueTy & ExpandedSCEVs )

pure virtual

The interface for creating a vectorized skeleton using one of two different strategies, each corresponding to one execution of the vplan as described above.

Implemented in llvm::EpilogueVectorizerMainLoop, and llvm::EpilogueVectorizerEpilogueLoop.

Referenced by createVectorizedLoopSkeleton().

◆ createVectorizedLoopSkeleton()

std::pair< BasicBlock *, Value * > llvm::InnerLoopAndEpilogueVectorizer::createVectorizedLoopSkeleton ( const SCEV2ValueTy & ExpandedSCEVs )

inlinefinalvirtual

Create a new empty loop that will contain vectorized instructions later on, while the old loop will be used as the scalar remainder.

Control flow is generated around the vectorized (and scalar epilogue) loops consisting of various checks and bypasses. Return the pre-header block of the new loop and the start value for the canonical induction, if it is != 0. The latter is the case when vectorizing the epilogue loop. In the case of epilogue vectorization, this function is overriden to handle the more complex control flow around the loops. ExpandedSCEVs is used to look up SCEV expansions for expressions needed during skeleton creation.

Reimplemented from llvm::InnerLoopVectorizer.

Definition at line 767 of file LoopVectorize.cpp.

References createEpilogueVectorizedLoopSkeleton().

Member Data Documentation

◆ EPI

EpilogueLoopVectorizationInfo& llvm::InnerLoopAndEpilogueVectorizer::EPI

Holds and updates state information required to vectorize the main loop and its epilogue in two separate passes.

This setup helps us avoid regenerating and recomputing runtime safety checks. It also helps us to shorten the iteration-count-check path length for the cases where the iteration count of the loop is so small that the main vector loop is completely skipped.

Definition at line 784 of file LoopVectorize.cpp.

Referenced by llvm::EpilogueVectorizerMainLoop::createEpilogueVectorizedLoopSkeleton(), llvm::EpilogueVectorizerEpilogueLoop::createEpilogueVectorizedLoopSkeleton(), llvm::EpilogueVectorizerMainLoop::emitIterationCountCheck(), llvm::EpilogueVectorizerEpilogueLoop::emitMinimumVectorEpilogueIterCountCheck(), llvm::EpilogueVectorizerEpilogueLoop::EpilogueVectorizerEpilogueLoop(), llvm::EpilogueVectorizerMainLoop::printDebugTracesAtStart(), and llvm::EpilogueVectorizerEpilogueLoop::printDebugTracesAtStart().

The documentation for this class was generated from the following file:

lib/Transforms/Vectorize/LoopVectorize.cpp

Public Member Functions

Public Attributes

Additional Inherited Members