|
LLVM 20.0.0git
|
This pass provides access to the codegen interfaces that are needed for IR-level transformations. More...
#include "llvm/Analysis/TargetTransformInfo.h"
Classes | |
| class | Concept |
| struct | LSRCost |
| struct | MemCmpExpansionOptions |
| Returns options for expansion of memcmp. IsZeroCmp is. More... | |
| struct | OperandValueInfo |
| struct | PeelingPreferences |
| struct | PointersChainInfo |
| Describe known properties for a set of pointers. More... | |
| struct | ReductionFlags |
| Flags describing the kind of vector reduction. More... | |
| struct | UnrollingPreferences |
| Parameters that control the generic loop unrolling transformation. More... | |
| struct | VPLegalization |
Public Member Functions | |
| template<typename T > | |
| TargetTransformInfo (T Impl) | |
Construct a TTI object using a type implementing the Concept API below. | |
| TargetTransformInfo (const DataLayout &DL) | |
Construct a baseline TTI object using a minimal implementation of the Concept API below. | |
| TargetTransformInfo (TargetTransformInfo &&Arg) | |
| TargetTransformInfo & | operator= (TargetTransformInfo &&RHS) |
| ~TargetTransformInfo () | |
| bool | invalidate (Function &, const PreservedAnalyses &, FunctionAnalysisManager::Invalidator &) |
| Handle the invalidation of this information. | |
| bool | hasArmWideBranch (bool Thumb) const |
| unsigned | getMaxNumArgs () const |
| unsigned | getNumBytesToPadGlobalArray (unsigned Size, Type *ArrayType) const |
Vector Predication Information | |
Whether the target supports the evl parameter of VP intrinsic efficiently in hardware, for the given opcode and type/alignment. (see LLVM Language Reference - "Vector Predication Intrinsics"). Use of evl is discouraged when that is not the case. | |
| bool | hasActiveVectorLength (unsigned Opcode, Type *DataType, Align Alignment) const |
| bool | isProfitableToSinkOperands (Instruction *I, SmallVectorImpl< Use * > &Ops) const |
| Return true if sinking I's operands to the same basic block as I is profitable, e.g. | |
| bool | isVectorShiftByScalarCheap (Type *Ty) const |
| Return true if it's significantly cheaper to shift a vector by a uniform scalar than by an amount which will vary across each lane. | |
| VPLegalization | getVPLegalizationStrategy (const VPIntrinsic &PI) const |
Generic Target Information | |
| enum | TargetCostKind { TCK_RecipThroughput , TCK_Latency , TCK_CodeSize , TCK_SizeAndLatency } |
| The kind of cost model. More... | |
| enum | TargetCostConstants { TCC_Free = 0 , TCC_Basic = 1 , TCC_Expensive = 4 } |
| Underlying constants for 'cost' values in this interface. More... | |
| InstructionCost | getGEPCost (Type *PointeeType, const Value *Ptr, ArrayRef< const Value * > Operands, Type *AccessType=nullptr, TargetCostKind CostKind=TCK_SizeAndLatency) const |
| Estimate the cost of a GEP operation when lowered. | |
| InstructionCost | getPointersChainCost (ArrayRef< const Value * > Ptrs, const Value *Base, const PointersChainInfo &Info, Type *AccessTy, TargetCostKind CostKind=TTI::TCK_RecipThroughput) const |
| Estimate the cost of a chain of pointers (typically pointer operands of a chain of loads or stores within same block) operations set when lowered. | |
| unsigned | getInliningThresholdMultiplier () const |
| unsigned | getInliningCostBenefitAnalysisSavingsMultiplier () const |
| unsigned | getInliningCostBenefitAnalysisProfitableMultiplier () const |
| int | getInliningLastCallToStaticBonus () const |
| unsigned | adjustInliningThreshold (const CallBase *CB) const |
| unsigned | getCallerAllocaCost (const CallBase *CB, const AllocaInst *AI) const |
| int | getInlinerVectorBonusPercent () const |
| InstructionCost | getMemcpyCost (const Instruction *I) const |
| uint64_t | getMaxMemIntrinsicInlineSizeThreshold () const |
| Returns the maximum memset / memcpy size in bytes that still makes it profitable to inline the call. | |
| unsigned | getEstimatedNumberOfCaseClusters (const SwitchInst &SI, unsigned &JTSize, ProfileSummaryInfo *PSI, BlockFrequencyInfo *BFI) const |
| InstructionCost | getInstructionCost (const User *U, ArrayRef< const Value * > Operands, TargetCostKind CostKind) const |
| Estimate the cost of a given IR user when lowered. | |
| InstructionCost | getInstructionCost (const User *U, TargetCostKind CostKind) const |
This is a helper function which calls the three-argument getInstructionCost with Operands which are the current operands U has. | |
| BranchProbability | getPredictableBranchThreshold () const |
| If a branch or a select condition is skewed in one direction by more than this factor, it is very likely to be predicted correctly. | |
| InstructionCost | getBranchMispredictPenalty () const |
| Returns estimated penalty of a branch misprediction in latency. | |
| bool | hasBranchDivergence (const Function *F=nullptr) const |
| Return true if branch divergence exists. | |
| bool | isSourceOfDivergence (const Value *V) const |
| Returns whether V is a source of divergence. | |
| bool | isAlwaysUniform (const Value *V) const |
| bool | isValidAddrSpaceCast (unsigned FromAS, unsigned ToAS) const |
| Query the target whether the specified address space cast from FromAS to ToAS is valid. | |
| bool | addrspacesMayAlias (unsigned AS0, unsigned AS1) const |
Return false if a AS0 address cannot possibly alias a AS1 address. | |
| unsigned | getFlatAddressSpace () const |
| Returns the address space ID for a target's 'flat' address space. | |
| bool | collectFlatAddressOperands (SmallVectorImpl< int > &OpIndexes, Intrinsic::ID IID) const |
| Return any intrinsic address operand indexes which may be rewritten if they use a flat address space pointer. | |
| bool | isNoopAddrSpaceCast (unsigned FromAS, unsigned ToAS) const |
| bool | canHaveNonUndefGlobalInitializerInAddressSpace (unsigned AS) const |
Return true if globals in this address space can have initializers other than undef. | |
| unsigned | getAssumedAddrSpace (const Value *V) const |
| bool | isSingleThreaded () const |
| std::pair< const Value *, unsigned > | getPredicatedAddrSpace (const Value *V) const |
| Value * | rewriteIntrinsicWithAddressSpace (IntrinsicInst *II, Value *OldV, Value *NewV) const |
Rewrite intrinsic call II such that OldV will be replaced with NewV, which has a different address space. | |
| bool | isLoweredToCall (const Function *F) const |
| Test whether calls to a function lower to actual program function calls. | |
| void | getUnrollingPreferences (Loop *L, ScalarEvolution &, UnrollingPreferences &UP, OptimizationRemarkEmitter *ORE) const |
| Get target-customized preferences for the generic loop unrolling transformation. | |
| bool | isHardwareLoopProfitable (Loop *L, ScalarEvolution &SE, AssumptionCache &AC, TargetLibraryInfo *LibInfo, HardwareLoopInfo &HWLoopInfo) const |
| Query the target whether it would be profitable to convert the given loop into a hardware loop. | |
| unsigned | getEpilogueVectorizationMinVF () const |
| bool | preferPredicateOverEpilogue (TailFoldingInfo *TFI) const |
| Query the target whether it would be prefered to create a predicated vector loop, which can avoid the need to emit a scalar epilogue loop. | |
| TailFoldingStyle | getPreferredTailFoldingStyle (bool IVUpdateMayOverflow=true) const |
| Query the target what the preferred style of tail folding is. | |
| void | getPeelingPreferences (Loop *L, ScalarEvolution &SE, PeelingPreferences &PP) const |
| Get target-customized preferences for the generic loop peeling transformation. | |
| std::optional< Instruction * > | instCombineIntrinsic (InstCombiner &IC, IntrinsicInst &II) const |
| Targets can implement their own combinations for target-specific intrinsics. | |
| std::optional< Value * > | simplifyDemandedUseBitsIntrinsic (InstCombiner &IC, IntrinsicInst &II, APInt DemandedMask, KnownBits &Known, bool &KnownBitsComputed) const |
| Can be used to implement target-specific instruction combining. | |
| std::optional< Value * > | simplifyDemandedVectorEltsIntrinsic (InstCombiner &IC, IntrinsicInst &II, APInt DemandedElts, APInt &UndefElts, APInt &UndefElts2, APInt &UndefElts3, std::function< void(Instruction *, unsigned, APInt, APInt &)> SimplifyAndSetOp) const |
| Can be used to implement target-specific instruction combining. | |
Scalar Target Information | |
| enum | PopcntSupportKind { PSK_Software , PSK_SlowHardware , PSK_FastHardware } |
| Flags indicating the kind of support for population count. More... | |
| enum | AddressingModeKind { AMK_PreIndexed , AMK_PostIndexed , AMK_None } |
| bool | isLegalAddImmediate (int64_t Imm) const |
| Return true if the specified immediate is legal add immediate, that is the target has add instructions which can add a register with the immediate without having to materialize the immediate into a register. | |
| bool | isLegalAddScalableImmediate (int64_t Imm) const |
| Return true if adding the specified scalable immediate is legal, that is the target has add instructions which can add a register with the immediate (multiplied by vscale) without having to materialize the immediate into a register. | |
| bool | isLegalICmpImmediate (int64_t Imm) const |
| Return true if the specified immediate is legal icmp immediate, that is the target has icmp instructions which can compare a register against the immediate without having to materialize the immediate into a register. | |
| bool | isLegalAddressingMode (Type *Ty, GlobalValue *BaseGV, int64_t BaseOffset, bool HasBaseReg, int64_t Scale, unsigned AddrSpace=0, Instruction *I=nullptr, int64_t ScalableOffset=0) const |
| Return true if the addressing mode represented by AM is legal for this target, for a load/store of the specified type. | |
| bool | isLSRCostLess (const TargetTransformInfo::LSRCost &C1, const TargetTransformInfo::LSRCost &C2) const |
| Return true if LSR cost of C1 is lower than C2. | |
| bool | isNumRegsMajorCostOfLSR () const |
| Return true if LSR major cost is number of registers. | |
| bool | shouldDropLSRSolutionIfLessProfitable () const |
| Return true if LSR should drop a found solution if it's calculated to be less profitable than the baseline. | |
| bool | isProfitableLSRChainElement (Instruction *I) const |
| bool | canMacroFuseCmp () const |
| Return true if the target can fuse a compare and branch. | |
| bool | canSaveCmp (Loop *L, BranchInst **BI, ScalarEvolution *SE, LoopInfo *LI, DominatorTree *DT, AssumptionCache *AC, TargetLibraryInfo *LibInfo) const |
| Return true if the target can save a compare for loop count, for example hardware loop saves a compare. | |
| AddressingModeKind | getPreferredAddressingMode (const Loop *L, ScalarEvolution *SE) const |
| Return the preferred addressing mode LSR should make efforts to generate. | |
| bool | isLegalMaskedStore (Type *DataType, Align Alignment) const |
| Return true if the target supports masked store. | |
| bool | isLegalMaskedLoad (Type *DataType, Align Alignment) const |
| Return true if the target supports masked load. | |
| bool | isLegalNTStore (Type *DataType, Align Alignment) const |
| Return true if the target supports nontemporal store. | |
| bool | isLegalNTLoad (Type *DataType, Align Alignment) const |
| Return true if the target supports nontemporal load. | |
| bool | isLegalBroadcastLoad (Type *ElementTy, ElementCount NumElements) const |
| \Returns true if the target supports broadcasting a load to a vector of type <NumElements x ElementTy>. | |
| bool | isLegalMaskedScatter (Type *DataType, Align Alignment) const |
| Return true if the target supports masked scatter. | |
| bool | isLegalMaskedGather (Type *DataType, Align Alignment) const |
| Return true if the target supports masked gather. | |
| bool | forceScalarizeMaskedGather (VectorType *Type, Align Alignment) const |
| Return true if the target forces scalarizing of llvm.masked.gather intrinsics. | |
| bool | forceScalarizeMaskedScatter (VectorType *Type, Align Alignment) const |
| Return true if the target forces scalarizing of llvm.masked.scatter intrinsics. | |
| bool | isLegalMaskedCompressStore (Type *DataType, Align Alignment) const |
| Return true if the target supports masked compress store. | |
| bool | isLegalMaskedExpandLoad (Type *DataType, Align Alignment) const |
| Return true if the target supports masked expand load. | |
| bool | isLegalStridedLoadStore (Type *DataType, Align Alignment) const |
| Return true if the target supports strided load. | |
| bool | isLegalInterleavedAccessType (VectorType *VTy, unsigned Factor, Align Alignment, unsigned AddrSpace) const |
Return true is the target supports interleaved access for the given vector type VTy, interleave factor Factor, alignment Alignment and address space AddrSpace. | |
| bool | isLegalMaskedVectorHistogram (Type *AddrType, Type *DataType) const |
| bool | isLegalAltInstr (VectorType *VecTy, unsigned Opcode0, unsigned Opcode1, const SmallBitVector &OpcodeMask) const |
| Return true if this is an alternating opcode pattern that can be lowered to a single instruction on the target. | |
| bool | enableOrderedReductions () const |
| Return true if we should be enabling ordered reductions for the target. | |
| bool | hasDivRemOp (Type *DataType, bool IsSigned) const |
| Return true if the target has a unified operation to calculate division and remainder. | |
| bool | hasVolatileVariant (Instruction *I, unsigned AddrSpace) const |
| Return true if the given instruction (assumed to be a memory access instruction) has a volatile variant. | |
| bool | prefersVectorizedAddressing () const |
| Return true if target doesn't mind addresses in vectors. | |
| InstructionCost | getScalingFactorCost (Type *Ty, GlobalValue *BaseGV, StackOffset BaseOffset, bool HasBaseReg, int64_t Scale, unsigned AddrSpace=0) const |
| Return the cost of the scaling factor used in the addressing mode represented by AM for this target, for a load/store of the specified type. | |
| bool | LSRWithInstrQueries () const |
| Return true if the loop strength reduce pass should make Instruction* based TTI queries to isLegalAddressingMode(). | |
| bool | isTruncateFree (Type *Ty1, Type *Ty2) const |
| Return true if it's free to truncate a value of type Ty1 to type Ty2. | |
| bool | isProfitableToHoist (Instruction *I) const |
| Return true if it is profitable to hoist instruction in the then/else to before if. | |
| bool | useAA () const |
| bool | isTypeLegal (Type *Ty) const |
| Return true if this type is legal. | |
| unsigned | getRegUsageForType (Type *Ty) const |
Returns the estimated number of registers required to represent Ty. | |
| bool | shouldBuildLookupTables () const |
| Return true if switches should be turned into lookup tables for the target. | |
| bool | shouldBuildLookupTablesForConstant (Constant *C) const |
| Return true if switches should be turned into lookup tables containing this constant value for the target. | |
| bool | shouldBuildRelLookupTables () const |
| Return true if lookup tables should be turned into relative lookup tables. | |
| bool | useColdCCForColdCall (Function &F) const |
| Return true if the input function which is cold at all call sites, should use coldcc calling convention. | |
| bool | isTargetIntrinsicTriviallyScalarizable (Intrinsic::ID ID) const |
| bool | isTargetIntrinsicWithScalarOpAtArg (Intrinsic::ID ID, unsigned ScalarOpdIdx) const |
| Identifies if the vector form of the intrinsic has a scalar operand. | |
| bool | isTargetIntrinsicWithOverloadTypeAtArg (Intrinsic::ID ID, int OpdIdx) const |
Identifies if the vector form of the intrinsic is overloaded on the type of the operand at index OpdIdx, or on the return type if OpdIdx is -1. | |
| bool | isTargetIntrinsicWithStructReturnOverloadAtField (Intrinsic::ID ID, int RetIdx) const |
Identifies if the vector form of the intrinsic that returns a struct is overloaded at the struct element index RetIdx. | |
| InstructionCost | getScalarizationOverhead (VectorType *Ty, const APInt &DemandedElts, bool Insert, bool Extract, TTI::TargetCostKind CostKind, ArrayRef< Value * > VL={}) const |
| Estimate the overhead of scalarizing an instruction. | |
| InstructionCost | getOperandsScalarizationOverhead (ArrayRef< const Value * > Args, ArrayRef< Type * > Tys, TTI::TargetCostKind CostKind) const |
| Estimate the overhead of scalarizing an instructions unique non-constant operands. | |
| bool | supportsEfficientVectorElementLoadStore () const |
| If target has efficient vector element load/store instructions, it can return true here so that insertion/extraction costs are not added to the scalarization cost of a load/store. | |
| bool | supportsTailCalls () const |
| If the target supports tail calls. | |
| bool | supportsTailCallFor (const CallBase *CB) const |
If target supports tail call on CB. | |
| bool | enableAggressiveInterleaving (bool LoopHasReductions) const |
| Don't restrict interleaved unrolling to small loops. | |
| MemCmpExpansionOptions | enableMemCmpExpansion (bool OptSize, bool IsZeroCmp) const |
| bool | enableSelectOptimize () const |
| Should the Select Optimization pass be enabled and ran. | |
| bool | shouldTreatInstructionLikeSelect (const Instruction *I) const |
| Should the Select Optimization pass treat the given instruction like a select, potentially converting it to a conditional branch. | |
| bool | enableInterleavedAccessVectorization () const |
| Enable matching of interleaved access groups. | |
| bool | enableMaskedInterleavedAccessVectorization () const |
| Enable matching of interleaved access groups that contain predicated accesses or gaps and therefore vectorized using masked vector loads/stores. | |
| bool | isFPVectorizationPotentiallyUnsafe () const |
| Indicate that it is potentially unsafe to automatically vectorize floating-point operations because the semantics of vector and scalar floating-point semantics may differ. | |
| bool | allowsMisalignedMemoryAccesses (LLVMContext &Context, unsigned BitWidth, unsigned AddressSpace=0, Align Alignment=Align(1), unsigned *Fast=nullptr) const |
| Determine if the target supports unaligned memory accesses. | |
| PopcntSupportKind | getPopcntSupport (unsigned IntTyWidthInBit) const |
| Return hardware support for population count. | |
| bool | haveFastSqrt (Type *Ty) const |
| Return true if the hardware has a fast square-root instruction. | |
| bool | isExpensiveToSpeculativelyExecute (const Instruction *I) const |
| Return true if the cost of the instruction is too high to speculatively execute and should be kept behind a branch. | |
| bool | isFCmpOrdCheaperThanFCmpZero (Type *Ty) const |
| Return true if it is faster to check if a floating-point value is NaN (or not-NaN) versus a comparison against a constant FP zero value. | |
| InstructionCost | getFPOpCost (Type *Ty) const |
| Return the expected cost of supporting the floating point operation of the specified type. | |
| InstructionCost | getIntImmCost (const APInt &Imm, Type *Ty, TargetCostKind CostKind) const |
| Return the expected cost of materializing for the given integer immediate of the specified type. | |
| InstructionCost | getIntImmCostInst (unsigned Opc, unsigned Idx, const APInt &Imm, Type *Ty, TargetCostKind CostKind, Instruction *Inst=nullptr) const |
| Return the expected cost of materialization for the given integer immediate of the specified type for a given instruction. | |
| InstructionCost | getIntImmCostIntrin (Intrinsic::ID IID, unsigned Idx, const APInt &Imm, Type *Ty, TargetCostKind CostKind) const |
| InstructionCost | getIntImmCodeSizeCost (unsigned Opc, unsigned Idx, const APInt &Imm, Type *Ty) const |
| Return the expected cost for the given integer when optimising for size. | |
| bool | preferToKeepConstantsAttached (const Instruction &Inst, const Function &Fn) const |
| It can be advantageous to detach complex constants from their uses to make their generation cheaper. | |
This pass provides access to the codegen interfaces that are needed for IR-level transformations.
Definition at line 212 of file TargetTransformInfo.h.
| Enumerator | |
|---|---|
| AMK_PreIndexed | |
| AMK_PostIndexed | |
| AMK_None | |
Definition at line 769 of file TargetTransformInfo.h.
|
strong |
|
strong |
Represents a hint about the context in which a cast is used.
For zext/sext, the context of the cast is the operand, which must be a load of some kind. For trunc, the context is of the cast is the single user of the instruction, which must be a store of some kind.
This enum allows the vectorizer to give getCastInstrCost an idea of the type of cast it's dealing with, as not every cast is equal. For instance, the zext of a load may be free, but the zext of an interleaving load can be (very) expensive!
See getCastContextHint to compute a CastContextHint from a cast Instruction*. Callers can use it if they don't need to override the context and just want it to be calculated from the instruction.
FIXME: This handles the types of load/store that the vectorizer can produce, which are the cases where the context instruction is most likely to be incorrect. There are other situations where that can happen too, which might be handled here but in the long run a more general solution of costing multiple instructions at the same times may be better.
Definition at line 1364 of file TargetTransformInfo.h.
The type of load/store indexing.
| Enumerator | |
|---|---|
| MIM_Unindexed | No indexing. |
| MIM_PreInc | Pre-incrementing. |
| MIM_PreDec | Pre-decrementing. |
| MIM_PostInc | Post-incrementing. |
| MIM_PostDec | Post-decrementing. |
Definition at line 1671 of file TargetTransformInfo.h.
Additional information about an operand's possible values.
| Enumerator | |
|---|---|
| OK_AnyValue | |
| OK_UniformValue | |
| OK_UniformConstantValue | |
| OK_NonUniformConstantValue | |
Definition at line 1107 of file TargetTransformInfo.h.
Additional properties of an operand's values.
| Enumerator | |
|---|---|
| OP_None | |
| OP_PowerOf2 | |
| OP_NegatedPowerOf2 | |
Definition at line 1115 of file TargetTransformInfo.h.
Flags indicating the kind of support for population count.
Compared to the SW implementation, HW support is supposed to significantly boost the performance when the population is dense, and it may or may not degrade performance if the population is sparse. A HW support is considered as "Fast" if it can outperform, or is on a par with, SW implementation when the population is sparse; otherwise, it is considered as "Slow".
| Enumerator | |
|---|---|
| PSK_Software | |
| PSK_SlowHardware | |
| PSK_FastHardware | |
Definition at line 708 of file TargetTransformInfo.h.
|
strong |
| Enumerator | |
|---|---|
| SplitHalf | |
| Pairwise | |
Definition at line 1763 of file TargetTransformInfo.h.
| Enumerator | |
|---|---|
| RGK_Scalar | |
| RGK_FixedWidthVector | |
| RGK_ScalableVector | |
Definition at line 1169 of file TargetTransformInfo.h.
The various kinds of shuffle patterns for vector queries.
Definition at line 1087 of file TargetTransformInfo.h.
Underlying constants for 'cost' values in this interface.
Many APIs in this interface return a cost. This enum defines the fundamental values that should be used to interpret (and produce) those costs. The costs are returned as an int rather than a member of this enumeration because it is expected that the cost of one IR instruction may have a multiplicative factor to it or otherwise won't fit directly into the enum. Moreover, it is common to sum or average costs which works better as simple integral values. Thus this enum only provides constants. Also note that the returned costs are signed integers to make it natural to add, subtract, and test with zero (a common boundary condition). It is not expected that 2^32 is a realistic cost to be modeling at any point.
Note that these costs should usually reflect the intersection of code-size cost and execution cost. A free instruction is typically one that folds into another instruction. For example, reg-to-reg moves can often be skipped by renaming the registers in the CPU, but they still are encoded and thus wouldn't be considered 'free' here.
| Enumerator | |
|---|---|
| TCC_Free | Expected to fold away in lowering. |
| TCC_Basic | The cost of a typical 'add' instruction. |
| TCC_Expensive | The cost of a 'div' instruction on x86. |
Definition at line 282 of file TargetTransformInfo.h.
The kind of cost model.
There are several different cost models that can be customized by the target. The normalization of each cost model may be target specific. e.g. TCK_SizeAndLatency should be comparable to target thresholds such as those derived from MCSchedModel::LoopMicroOpBufferSize etc.
| Enumerator | |
|---|---|
| TCK_RecipThroughput | Reciprocal throughput. |
| TCK_Latency | The latency of instruction. |
| TCK_CodeSize | Instruction code size. |
| TCK_SizeAndLatency | The weighted sum of size and latency. |
Definition at line 257 of file TargetTransformInfo.h.
Construct a TTI object using a type implementing the Concept API below.
This is used by targets to construct a TTI wrapping their target-specific implementation that encodes appropriate costs for their target.
Definition at line 3114 of file TargetTransformInfo.h.
|
explicit |
Construct a baseline TTI object using a minimal implementation of the Concept API below.
The TTI implementation will reflect the information in the DataLayout provided if non-null.
Definition at line 202 of file TargetTransformInfo.cpp.
| TargetTransformInfo::TargetTransformInfo | ( | TargetTransformInfo && | Arg | ) |
Definition at line 207 of file TargetTransformInfo.cpp.
|
default |
Return false if a AS0 address cannot possibly alias a AS1 address.
Definition at line 310 of file TargetTransformInfo.cpp.
Referenced by llvm::expandMemMoveAsLoop().
Definition at line 235 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::allowsMisalignedMemoryAccesses | ( | LLVMContext & | Context, |
| unsigned | BitWidth, | ||
| unsigned | AddressSpace = 0, |
||
| Align | Alignment = Align(1), |
||
| unsigned * | Fast = nullptr |
||
| ) | const |
Determine if the target supports unaligned memory accesses.
Definition at line 685 of file TargetTransformInfo.cpp.
References llvm::BitWidth, and llvm::CallingConv::Fast.
Referenced by foldConsecutiveLoads().
| bool TargetTransformInfo::areInlineCompatible | ( | const Function * | Caller, |
| const Function * | Callee | ||
| ) | const |
Definition at line 1266 of file TargetTransformInfo.cpp.
Referenced by functionsHaveCompatibleAttributes().
| bool TargetTransformInfo::areTypesABICompatible | ( | const Function * | Caller, |
| const Function * | Callee, | ||
| const ArrayRef< Type * > & | Types | ||
| ) | const |
Types will be passed to or returned from the callee. to the callee. | Types | List of types to check. |
Definition at line 1278 of file TargetTransformInfo.cpp.
Return true if globals in this address space can have initializers other than undef.
Definition at line 329 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::canMacroFuseCmp | ( | ) | const |
Return true if the target can fuse a compare and branch.
Loop-strength-reduction (LSR) uses that knowledge to adjust its cost calculation for the instructions in a loop.
Definition at line 449 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::canSaveCmp | ( | Loop * | L, |
| BranchInst ** | BI, | ||
| ScalarEvolution * | SE, | ||
| LoopInfo * | LI, | ||
| DominatorTree * | DT, | ||
| AssumptionCache * | AC, | ||
| TargetLibraryInfo * | LibInfo | ||
| ) | const |
Return true if the target can save a compare for loop count, for example hardware loop saves a compare.
Definition at line 453 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::collectFlatAddressOperands | ( | SmallVectorImpl< int > & | OpIndexes, |
| Intrinsic::ID | IID | ||
| ) | const |
Return any intrinsic address operand indexes which may be rewritten if they use a flat address space pointer.
Definition at line 319 of file TargetTransformInfo.cpp.
Don't restrict interleaved unrolling to small loops.
Definition at line 653 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizationCostModel::selectInterleaveCount().
| bool TargetTransformInfo::enableInterleavedAccessVectorization | ( | ) | const |
Enable matching of interleaved access groups.
Definition at line 672 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizePass::processLoop().
| bool TargetTransformInfo::enableMaskedInterleavedAccessVectorization | ( | ) | const |
Enable matching of interleaved access groups that contain predicated accesses or gaps and therefore vectorized using masked vector loads/stores.
Definition at line 676 of file TargetTransformInfo.cpp.
Referenced by useMaskedInterleavedAccesses().
| TargetTransformInfo::MemCmpExpansionOptions TargetTransformInfo::enableMemCmpExpansion | ( | bool | OptSize, |
| bool | IsZeroCmp | ||
| ) | const |
Definition at line 659 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::enableOrderedReductions | ( | ) | const |
Return true if we should be enabling ordered reductions for the target.
Definition at line 543 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizePass::processLoop().
| bool TargetTransformInfo::enableScalableVectorization | ( | ) | const |
Definition at line 1394 of file TargetTransformInfo.cpp.
Referenced by determineVPlanVF(), and llvm::LoopVectorizeHints::LoopVectorizeHints().
| bool TargetTransformInfo::enableSelectOptimize | ( | ) | const |
Should the Select Optimization pass be enabled and ran.
Definition at line 663 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::enableWritePrefetching | ( | ) | const |
Definition at line 858 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::forceScalarizeMaskedGather | ( | VectorType * | Type, |
| Align | Alignment | ||
| ) | const |
Return true if the target forces scalarizing of llvm.masked.gather intrinsics.
Definition at line 506 of file TargetTransformInfo.cpp.
Referenced by llvm::slpvectorizer::BoUpSLP::canVectorizeLoads(), and optimizeCallInst().
| bool TargetTransformInfo::forceScalarizeMaskedScatter | ( | VectorType * | Type, |
| Align | Alignment | ||
| ) | const |
Return true if the target forces scalarizing of llvm.masked.scatter intrinsics.
Definition at line 511 of file TargetTransformInfo.cpp.
Referenced by optimizeCallInst().
| InstructionCost TargetTransformInfo::getAddressComputationCost | ( | Type * | Ty, |
| ScalarEvolution * | SE = nullptr, |
||
| const SCEV * | Ptr = nullptr |
||
| ) | const |
Definition at line 1180 of file TargetTransformInfo.cpp.
Referenced by chainToBasePointerCost(), and llvm::VPWidenMemoryRecipe::computeCost().
| InstructionCost TargetTransformInfo::getAltInstrCost | ( | VectorType * | VecTy, |
| unsigned | Opcode0, | ||
| unsigned | Opcode1, | ||
| const SmallBitVector & | OpcodeMask, | ||
| TTI::TargetCostKind | CostKind = TTI::TCK_RecipThroughput |
||
| ) | const |
Returns the cost estimation for alternating opcode pattern that can be lowered to a single instruction on the target.
In X86 this is for the addsub instruction which corrsponds to a Shuffle + Fadd + FSub pattern in IR. This function expects two opcodes: Opcode1 and Opcode2 being selected by OpcodeMask. The mask contains one bit per lane and is a 0 when Opcode0 is selected and 1 when Opcode1 is selected. VecTy is the vector type of the instruction to be generated.
Definition at line 958 of file TargetTransformInfo.cpp.
| InstructionCost TargetTransformInfo::getArithmeticInstrCost | ( | unsigned | Opcode, |
| Type * | Ty, | ||
| TTI::TargetCostKind | CostKind = TTI::TCK_RecipThroughput, |
||
| TTI::OperandValueInfo | Opd1Info = {TTI::OK_AnyValue, TTI::OP_None}, |
||
| TTI::OperandValueInfo | Opd2Info = {TTI::OK_AnyValue, TTI::OP_None}, |
||
| ArrayRef< const Value * > | Args = {}, |
||
| const Instruction * | CxtI = nullptr, |
||
| const TargetLibraryInfo * | TLibInfo = nullptr |
||
| ) | const |
This is an approximation of reciprocal throughput of a math/logic op.
A higher cost indicates less expected throughput. From Agner Fog's guides, reciprocal throughput is "the average number of
clock cycles per instruction when the instructions are not part of a
limiting dependency chain." Therefore, costs should be scaled to account for multiple execution units on the target that can process this type of instruction. For example, if there are 5 scalar integer units and 2 vector integer units that can calculate an 'add' in a single cycle, this model should indicate that the cost of the vector add instruction is 2.5 times the cost of the scalar add instruction. Args is an optional argument which holds the instruction operands values so the TTI can analyze those values searching for special cases or optimizations based on those values. CxtI is the optional original context instruction, if one exists, to provide even more information. TLibInfo is used to search for platform specific vector library functions for instructions that might be converted to calls (e.g. frem).
Definition at line 931 of file TargetTransformInfo.cpp.
References assert(), CostKind, getCallInstrCost(), llvm::VectorType::getElementCount(), llvm::TargetLibraryInfo::getLibFunc(), llvm::TargetLibraryInfo::getName(), llvm::Type::getScalarType(), and llvm::TargetLibraryInfo::isFunctionVectorizable().
Referenced by llvm::VPWidenRecipe::computeCost(), llvm::VPHistogramRecipe::computeCost(), llvm::VPWidenSelectRecipe::computeCost(), llvm::VPReductionRecipe::computeCost(), costAndCollectOperands(), llvm::foldBranchToCommonDest(), llvm::LoopVectorizationCostModel::getDivRemSpeculationCost(), llvm::LoopVectorizationCostModel::getInstructionCost(), llvm::LoopVectorizationCostModel::getReductionPatternCost(), and visitIVCast().
| InstructionCost TargetTransformInfo::getArithmeticReductionCost | ( | unsigned | Opcode, |
| VectorType * | Ty, | ||
| std::optional< FastMathFlags > | FMF, | ||
| TTI::TargetCostKind | CostKind = TTI::TCK_RecipThroughput |
||
| ) | const |
Calculate the cost of vector reduction intrinsics.
This is the cost of reducing the vector value of type Ty to a scalar value using the operation denoted by Opcode. The FastMathFlags parameter FMF indicates what type of reduction we are performing:
FMF indicates that reassociation is allowed.Definition at line 1197 of file TargetTransformInfo.cpp.
References assert(), and CostKind.
Referenced by llvm::VPReductionRecipe::computeCost(), and llvm::LoopVectorizationCostModel::getReductionPatternCost().
Definition at line 334 of file TargetTransformInfo.cpp.
Referenced by isAddressExpression().
| unsigned TargetTransformInfo::getAtomicMemIntrinsicMaxElementSize | ( | ) | const |
Definition at line 1238 of file TargetTransformInfo.cpp.
| InstructionCost TargetTransformInfo::getBranchMispredictPenalty | ( | ) | const |
Returns estimated penalty of a branch misprediction in latency.
Indicates how aggressive the target wants for eliminating unpredictable branches. A zero return value means extra optimization applied to them should be minimal.
Definition at line 285 of file TargetTransformInfo.cpp.
Referenced by foldTwoEntryPHINode().
| std::optional< unsigned > TargetTransformInfo::getCacheAssociativity | ( | CacheLevel | Level | ) | const |
Definition at line 834 of file TargetTransformInfo.cpp.
| unsigned TargetTransformInfo::getCacheLineSize | ( | ) | const |
Definition at line 823 of file TargetTransformInfo.cpp.
References CacheLineSize.
| std::optional< unsigned > TargetTransformInfo::getCacheSize | ( | CacheLevel | Level | ) | const |
Definition at line 829 of file TargetTransformInfo.cpp.
| unsigned TargetTransformInfo::getCallerAllocaCost | ( | const CallBase * | CB, |
| const AllocaInst * | AI | ||
| ) | const |
Definition at line 239 of file TargetTransformInfo.cpp.
| InstructionCost TargetTransformInfo::getCallInstrCost | ( | Function * | F, |
| Type * | RetTy, | ||
| ArrayRef< Type * > | Tys, | ||
| TTI::TargetCostKind | CostKind = TTI::TCK_SizeAndLatency |
||
| ) | const |
Definition at line 1167 of file TargetTransformInfo.cpp.
References assert(), CostKind, F, and RetTy.
Referenced by llvm::VPWidenCallRecipe::computeCost(), getArithmeticInstrCost(), llvm::slpvectorizer::BoUpSLP::getSpillCost(), llvm::LoopVectorizationCostModel::getVectorCallCost(), getVectorCallCosts(), and llvm::LoopVectorizationCostModel::setVectorizedCallDecision().
|
static |
Calculates a CastContextHint from I.
This should be used by callers of getCastInstrCost if they wish to determine the context from some instruction.
I is nullptr, or if it's another type of cast. Definition at line 978 of file TargetTransformInfo.cpp.
References GatherScatter, I, II, Masked, None, and Normal.
Referenced by chainToBasePointerCost(), llvm::TargetTransformInfoImplCRTPBase< T >::getInstructionCost(), and llvm::AArch64TargetLowering::optimizeExtendOrTruncateConversion().
| InstructionCost TargetTransformInfo::getCastInstrCost | ( | unsigned | Opcode, |
| Type * | Dst, | ||
| Type * | Src, | ||
| TTI::CastContextHint | CCH, | ||
| TTI::TargetCostKind | CostKind = TTI::TCK_SizeAndLatency, |
||
| const Instruction * | I = nullptr |
||
| ) | const |
Definition at line 1021 of file TargetTransformInfo.cpp.
References assert(), CostKind, and I.
Referenced by chainToBasePointerCost(), llvm::VPWidenCastRecipe::computeCost(), costAndCollectOperands(), llvm::BasicTTIImplBase< T >::getCastInstrCost(), llvm::LoopVectorizationCostModel::getInstructionCost(), llvm::LoopVectorizationCostModel::getReductionPatternCost(), llvm::slpvectorizer::BoUpSLP::getTreeCost(), llvm::AArch64TargetLowering::optimizeExtendOrTruncateConversion(), and tryToFPToSat().
| InstructionCost TargetTransformInfo::getCFInstrCost | ( | unsigned | Opcode, |
| TTI::TargetCostKind | CostKind = TTI::TCK_SizeAndLatency, |
||
| const Instruction * | I = nullptr |
||
| ) | const |
Definition at line 1040 of file TargetTransformInfo.cpp.
References assert(), CostKind, and I.
Referenced by llvm::VPHeaderPHIRecipe::computeCost(), llvm::VPFirstOrderRecurrencePHIRecipe::computeCost(), llvm::VPBlendRecipe::computeCost(), llvm::VPRegionBlock::cost(), costAndCollectOperands(), findCostForOutputBlocks(), llvm::LoopVectorizationCostModel::getDivRemSpeculationCost(), and llvm::LoopVectorizationCostModel::getInstructionCost().
| InstructionCost TargetTransformInfo::getCmpSelInstrCost | ( | unsigned | Opcode, |
| Type * | ValTy, | ||
| Type * | CondTy, | ||
| CmpInst::Predicate | VecPred, | ||
| TTI::TargetCostKind | CostKind = TTI::TCK_RecipThroughput, |
||
| OperandValueInfo | Op1Info = {OK_AnyValue, OP_None}, |
||
| OperandValueInfo | Op2Info = {OK_AnyValue, OP_None}, |
||
| const Instruction * | I = nullptr |
||
| ) | const |
VecPred parameter can be used to indicate the select is using a compare with the specified predicate as condition. When vector types are passed, VecPred must be used for all lanes. For a comparison, the two operands are the natural values. For a select, the two operands are the value operands, not the condition operand. Definition at line 1049 of file TargetTransformInfo.cpp.
References assert(), CostKind, and I.
Referenced by llvm::VPWidenRecipe::computeCost(), llvm::VPWidenSelectRecipe::computeCost(), llvm::VPBlendRecipe::computeCost(), costAndCollectOperands(), findCostForOutputBlocks(), llvm::LoopVectorizationCostModel::getDivRemSpeculationCost(), llvm::LoopVectorizationCostModel::getInstructionCost(), and validateAndCostRequiredSelects().
| InstructionCost TargetTransformInfo::getCostOfKeepingLiveOverCall | ( | ArrayRef< Type * > | Tys | ) | const |
Some types may require the use of register classes that do not have any callee-saved registers, so would require a spill and fill.
Definition at line 1229 of file TargetTransformInfo.cpp.
Referenced by llvm::slpvectorizer::BoUpSLP::getSpillCost().
| unsigned TargetTransformInfo::getEpilogueVectorizationMinVF | ( | ) | const |
Definition at line 362 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizationCostModel::isEpilogueVectorizationProfitable().
| unsigned TargetTransformInfo::getEstimatedNumberOfCaseClusters | ( | const SwitchInst & | SI, |
| unsigned & | JTSize, | ||
| ProfileSummaryInfo * | PSI, | ||
| BlockFrequencyInfo * | BFI | ||
| ) | const |
'SI'. JTSize Set a jump table size only when SI is suitable for a jump table. Definition at line 263 of file TargetTransformInfo.cpp.
| InstructionCost TargetTransformInfo::getExtendedReductionCost | ( | unsigned | Opcode, |
| bool | IsUnsigned, | ||
| Type * | ResTy, | ||
| VectorType * | Ty, | ||
| FastMathFlags | FMF, | ||
| TTI::TargetCostKind | CostKind = TTI::TCK_RecipThroughput |
||
| ) | const |
Calculate the cost of an extended reduction pattern, similar to getArithmeticReductionCost of a reduction with an extension.
This is the cost of as: ResTy vecreduce.opcode(ext(Ty A)).
Definition at line 1215 of file TargetTransformInfo.cpp.
References CostKind.
Referenced by llvm::LoopVectorizationCostModel::getReductionPatternCost().
| InstructionCost TargetTransformInfo::getExtractWithExtendCost | ( | unsigned | Opcode, |
| Type * | Dst, | ||
| VectorType * | VecTy, | ||
| unsigned | Index | ||
| ) | const |
Definition at line 1032 of file TargetTransformInfo.cpp.
References assert().
Referenced by llvm::slpvectorizer::BoUpSLP::getTreeCost().
| unsigned TargetTransformInfo::getFlatAddressSpace | ( | ) | const |
Returns the address space ID for a target's 'flat' address space.
Note this is not necessarily the same as addrspace(0), which LLVM sometimes refers to as the generic address space. The flat address space is a generic address space that can be used access multiple segments of memory with different address spaces. Access of a memory location through a pointer with this address space is expected to be legal but slower compared to the same memory location accessed through a pointer with a different address space. This is for targets with different pointer representations which can be converted with the addrspacecast instruction. If a pointer is converted to this address space, optimizations should attempt to replace the access with the source address space.
Definition at line 315 of file TargetTransformInfo.cpp.
| InstructionCost TargetTransformInfo::getFPOpCost | ( | Type * | Ty | ) | const |
Return the expected cost of supporting the floating point operation of the specified type.
Definition at line 712 of file TargetTransformInfo.cpp.
References assert().
| InstructionCost TargetTransformInfo::getGatherScatterOpCost | ( | unsigned | Opcode, |
| Type * | DataTy, | ||
| const Value * | Ptr, | ||
| bool | VariableMask, | ||
| Align | Alignment, | ||
| TTI::TargetCostKind | CostKind = TTI::TCK_RecipThroughput, |
||
| const Instruction * | I = nullptr |
||
| ) | const |
Opcode - is a type of memory access Load or Store DataTy - a vector type of the data to be loaded or stored Ptr - pointer [or vector of pointers] - address[es] in memory VariableMask - true when the memory access is predicated with a mask that is not a compile-time constant Alignment - alignment of single element I - the optional original context instruction, if one exists, e.g. the load/store to transform or the call to the gather/scatter intrinsic Definition at line 1128 of file TargetTransformInfo.cpp.
References assert(), CostKind, I, llvm::InstructionCost::isValid(), and Ptr.
Referenced by llvm::slpvectorizer::BoUpSLP::canVectorizeLoads(), and llvm::VPWidenMemoryRecipe::computeCost().
| InstructionCost TargetTransformInfo::getGEPCost | ( | Type * | PointeeType, |
| const Value * | Ptr, | ||
| ArrayRef< const Value * > | Operands, | ||
| Type * | AccessType = nullptr, |
||
| TTI::TargetCostKind | CostKind = TCK_SizeAndLatency |
||
| ) | const |
Estimate the cost of a GEP operation when lowered.
PointeeType is the source element type of the GEP. Ptr is the base pointer operand. Operands is the list of indices following the base pointer.
AccessType is a hint as to what type of memory might be accessed by users of the GEP. getGEPCost will use it to determine if the GEP can be folded into the addressing mode of a load/store. If AccessType is null, then the resulting target type based off of PointeeType will be used as an approximation.
Definition at line 248 of file TargetTransformInfo.cpp.
References CostKind, Operands, and Ptr.
Referenced by getGEPCosts(), and isGEPFoldable().
| unsigned TargetTransformInfo::getGISelRematGlobalCost | ( | ) | const |
Definition at line 1382 of file TargetTransformInfo.cpp.
Referenced by llvm::TargetLoweringBase::shouldLocalize().
| unsigned TargetTransformInfo::getInlineCallPenalty | ( | const Function * | F, |
| const CallBase & | Call, | ||
| unsigned | DefaultCallPenalty | ||
| ) | const |
Returns a penalty for invoking call Call in F.
For example, if a function F calls a function G, which in turn calls function H, then getInlineCallPenalty(F, H()) would return the penalty of calling H from F, e.g. after inlining G into F. DefaultCallPenalty is passed to give a default penalty that the target can amend or override.
Definition at line 1272 of file TargetTransformInfo.cpp.
References F.
Referenced by llvm::getCallsiteCost().
| int TargetTransformInfo::getInlinerVectorBonusPercent | ( | ) | const |
Vector bonuses: We want to more aggressively inline vector-dense kernels and apply this bonus based on the percentage of vector instructions. A bonus is applied if the vector instructions exceed 50% and half that amount is applied if it exceeds 10%. Note that these bonuses are some what arbitrary and evolved over time by accident as much as because they are principled bonuses. FIXME: It would be nice to base the bonus values on something more scientific. A target may has no bonus on vector instructions.
Definition at line 244 of file TargetTransformInfo.cpp.
| unsigned TargetTransformInfo::getInliningCostBenefitAnalysisProfitableMultiplier | ( | ) | const |
Definition at line 225 of file TargetTransformInfo.cpp.
| unsigned TargetTransformInfo::getInliningCostBenefitAnalysisSavingsMultiplier | ( | ) | const |
Definition at line 220 of file TargetTransformInfo.cpp.
| int TargetTransformInfo::getInliningLastCallToStaticBonus | ( | ) | const |
Definition at line 230 of file TargetTransformInfo.cpp.
Referenced by shouldBeDeferred().
| unsigned TargetTransformInfo::getInliningThresholdMultiplier | ( | ) | const |
TODO: This is a rather blunt instrument. Perhaps altering the costs of individual classes of instructions would be better.
Definition at line 215 of file TargetTransformInfo.cpp.
| InstructionCost TargetTransformInfo::getInstructionCost | ( | const User * | U, |
| ArrayRef< const Value * > | Operands, | ||
| TargetCostKind | CostKind | ||
| ) | const |
Estimate the cost of a given IR user when lowered.
This can estimate the cost of either a ConstantExpr or Instruction when lowered.
Operands is a list of operands which can be a result of transformations of the current operands. The number of the operands on the list must equal to the number of the current operands the IR user has. Their order on the list must be the same as the order of the current operands the IR user has.
The returned cost is defined in terms of TargetCostConstants, see its comments for a detailed explanation of the cost values.
Definition at line 270 of file TargetTransformInfo.cpp.
References assert(), CostKind, Operands, and TCK_RecipThroughput.
Referenced by llvm::CodeMetrics::analyzeBasicBlock(), analyzeLoopUnrollCost(), canSplitCallSite(), llvm::slpvectorizer::BoUpSLP::canVectorizeLoads(), checkOuterLoopInsts(), llvm::ComputeSpeculationCost(), computeSpeculationCost(), findBestNonTrivialUnswitchCandidate(), llvm::foldBranchToCommonDest(), getAppleRuntimeUnrollPreferences(), llvm::OutlinableRegion::getBenefit(), getInstructionCost(), llvm::LoopVectorizationCostModel::getInstructionCost(), getJumpThreadDuplicationCost(), llvm::InstCostVisitor::getLatencySavingsForKnownConstants(), getOutliningBenefit(), llvm::slpvectorizer::BoUpSLP::getTreeCost(), isFoldableInLoop(), mergeConditionalStoreToAddress(), llvm::CostModelPrinterPass::run(), llvm::SelectionDAGBuilder::shouldKeepJumpConditionsTogether(), and llvm::slpvectorizer::BoUpSLP::transformNodes().
|
inline |
This is a helper function which calls the three-argument getInstructionCost with Operands which are the current operands U has.
Definition at line 411 of file TargetTransformInfo.h.
References CostKind, getInstructionCost(), and Operands.
| InstructionCost TargetTransformInfo::getInterleavedMemoryOpCost | ( | unsigned | Opcode, |
| Type * | VecTy, | ||
| unsigned | Factor, | ||
| ArrayRef< unsigned > | Indices, | ||
| Align | Alignment, | ||
| unsigned | AddressSpace, | ||
| TTI::TargetCostKind | CostKind = TTI::TCK_RecipThroughput, |
||
| bool | UseMaskForCond = false, |
||
| bool | UseMaskForGaps = false |
||
| ) | const |
Opcode is the memory operation code VecTy is the vector type of the interleaved access. Factor is the interleave factor Indices is the indices for interleaved load members (as interleaved load allows gaps) Alignment is the alignment of the memory operation AddressSpace is address space of the pointer. UseMaskForCond indicates if the memory access is predicated. UseMaskForGaps indicates if gaps should be masked. Definition at line 1147 of file TargetTransformInfo.cpp.
References assert(), and CostKind.
Referenced by llvm::VPInterleaveRecipe::computeCost().
| InstructionCost TargetTransformInfo::getIntImmCodeSizeCost | ( | unsigned | Opc, |
| unsigned | Idx, | ||
| const APInt & | Imm, | ||
| Type * | Ty | ||
| ) | const |
Return the expected cost for the given integer when optimising for size.
This is different than the other integer immediate cost functions in that it is subtarget agnostic. This is useful when you e.g. target one ISA such as Aarch32 but smaller encodings could be possible with another such as Thumb. This return value is used as a penalty when the total costs for a constant is calculated (the bigger the cost, the more beneficial constant hoisting is).
Definition at line 718 of file TargetTransformInfo.cpp.
| InstructionCost TargetTransformInfo::getIntImmCost | ( | const APInt & | Imm, |
| Type * | Ty, | ||
| TTI::TargetCostKind | CostKind | ||
| ) | const |
Return the expected cost of materializing for the given integer immediate of the specified type.
Definition at line 728 of file TargetTransformInfo.cpp.
References assert(), and CostKind.
Referenced by tryUnmergingGEPsAcrossIndirectBr().
| InstructionCost TargetTransformInfo::getIntImmCostInst | ( | unsigned | Opc, |
| unsigned | Idx, | ||
| const APInt & | Imm, | ||
| Type * | Ty, | ||
| TTI::TargetCostKind | CostKind, | ||
| Instruction * | Inst = nullptr |
||
| ) | const |
Return the expected cost of materialization for the given integer immediate of the specified type for a given instruction.
The cost can be zero if the immediate can be folded into the specified instruction.
Definition at line 735 of file TargetTransformInfo.cpp.
| InstructionCost TargetTransformInfo::getIntImmCostIntrin | ( | Intrinsic::ID | IID, |
| unsigned | Idx, | ||
| const APInt & | Imm, | ||
| Type * | Ty, | ||
| TTI::TargetCostKind | CostKind | ||
| ) | const |
Definition at line 745 of file TargetTransformInfo.cpp.
| InstructionCost TargetTransformInfo::getIntrinsicInstrCost | ( | const IntrinsicCostAttributes & | ICA, |
| TTI::TargetCostKind | CostKind | ||
| ) | const |
Definition at line 1159 of file TargetTransformInfo.cpp.
References assert(), and CostKind.
Referenced by llvm::VPWidenIntrinsicRecipe::computeCost(), llvm::VPHistogramRecipe::computeCost(), llvm::LoopVectorizationCostModel::getInstructionCost(), llvm::slpvectorizer::BoUpSLP::getSpillCost(), getVectorCallCosts(), llvm::LoopVectorizationCostModel::getVectorIntrinsicCost(), llvm::CostModelPrinterPass::run(), simplifySwitchOfPowersOfTwo(), and tryToFPToSat().
Definition at line 1294 of file TargetTransformInfo.cpp.
| unsigned TargetTransformInfo::getLoadVectorFactor | ( | unsigned | VF, |
| unsigned | LoadSize, | ||
| unsigned | ChainSizeInBytes, | ||
| VectorType * | VecTy | ||
| ) | const |
SizeInBytes loads or has a better vector factor. Definition at line 1327 of file TargetTransformInfo.cpp.
| InstructionCost TargetTransformInfo::getMaskedMemoryOpCost | ( | unsigned | Opcode, |
| Type * | Src, | ||
| Align | Alignment, | ||
| unsigned | AddressSpace, | ||
| TTI::TargetCostKind | CostKind = TTI::TCK_RecipThroughput |
||
| ) | const |
Definition at line 1119 of file TargetTransformInfo.cpp.
References assert(), and CostKind.
Referenced by llvm::VPWidenMemoryRecipe::computeCost(), llvm::VPWidenLoadEVLRecipe::computeCost(), and llvm::VPWidenStoreEVLRecipe::computeCost().
Definition at line 807 of file TargetTransformInfo.cpp.
Referenced by llvm::slpvectorizer::BoUpSLP::getMaximumVF().
| unsigned TargetTransformInfo::getMaxInterleaveFactor | ( | ElementCount | VF | ) | const |
Definition at line 866 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizationCostModel::isEpilogueVectorizationProfitable(), llvm::LoopVectorizePass::runImpl(), and llvm::LoopVectorizationCostModel::selectInterleaveCount().
| uint64_t TargetTransformInfo::getMaxMemIntrinsicInlineSizeThreshold | ( | ) | const |
Returns the maximum memset / memcpy size in bytes that still makes it profitable to inline the call.
Definition at line 1193 of file TargetTransformInfo.cpp.
| unsigned TargetTransformInfo::getMaxNumArgs | ( | ) | const |
Definition at line 1368 of file TargetTransformInfo.cpp.
Referenced by promoteArguments().
| unsigned TargetTransformInfo::getMaxPrefetchIterationsAhead | ( | ) | const |
Definition at line 854 of file TargetTransformInfo.cpp.
| std::optional< unsigned > TargetTransformInfo::getMaxVScale | ( | ) | const |
Definition at line 785 of file TargetTransformInfo.cpp.
Referenced by getMaxVScale().
| InstructionCost TargetTransformInfo::getMemcpyCost | ( | const Instruction * | I | ) | const |
Definition at line 1187 of file TargetTransformInfo.cpp.
| Type * TargetTransformInfo::getMemcpyLoopLoweringType | ( | LLVMContext & | Context, |
| Value * | Length, | ||
| unsigned | SrcAddrSpace, | ||
| unsigned | DestAddrSpace, | ||
| Align | SrcAlign, | ||
| Align | DestAlign, | ||
| std::optional< uint32_t > | AtomicElementSize = std::nullopt |
||
| ) | const |
Definition at line 1247 of file TargetTransformInfo.cpp.
References llvm::Length.
Referenced by llvm::createMemCpyLoopKnownSize(), createMemMoveLoopKnownSize(), and createMemMoveLoopUnknownSize().
| void TargetTransformInfo::getMemcpyLoopResidualLoweringType | ( | SmallVectorImpl< Type * > & | OpsOut, |
| LLVMContext & | Context, | ||
| unsigned | RemainingBytes, | ||
| unsigned | SrcAddrSpace, | ||
| unsigned | DestAddrSpace, | ||
| Align | SrcAlign, | ||
| Align | DestAlign, | ||
| std::optional< uint32_t > | AtomicCpySize = std::nullopt |
||
| ) | const |
| [out] | OpsOut | The operand types to copy RemainingBytes of memory. |
| RemainingBytes | The number of bytes to copy. |
Calculates the operand types to use when copying RemainingBytes of memory, where source and destination alignments are SrcAlign and DestAlign respectively.
Definition at line 1256 of file TargetTransformInfo.cpp.
Referenced by llvm::createMemCpyLoopKnownSize(), and createMemMoveLoopKnownSize().
| InstructionCost TargetTransformInfo::getMemoryOpCost | ( | unsigned | Opcode, |
| Type * | Src, | ||
| Align | Alignment, | ||
| unsigned | AddressSpace, | ||
| TTI::TargetCostKind | CostKind = TTI::TCK_RecipThroughput, |
||
| TTI::OperandValueInfo | OpInfo = {OK_AnyValue, OP_None}, |
||
| const Instruction * | I = nullptr |
||
| ) | const |
Definition at line 1107 of file TargetTransformInfo.cpp.
References assert(), CostKind, and I.
Referenced by llvm::slpvectorizer::BoUpSLP::canVectorizeLoads(), llvm::VPWidenMemoryRecipe::computeCost(), findCostForOutputBlocks(), and llvm::slpvectorizer::BoUpSLP::transformNodes().
| ElementCount TargetTransformInfo::getMinimumVF | ( | unsigned | ElemWidth, |
| bool | IsScalable | ||
| ) | const |
Definition at line 802 of file TargetTransformInfo.cpp.
| InstructionCost TargetTransformInfo::getMinMaxReductionCost | ( | Intrinsic::ID | IID, |
| VectorType * | Ty, | ||
| FastMathFlags | FMF = FastMathFlags(), |
||
| TTI::TargetCostKind | CostKind = TTI::TCK_RecipThroughput |
||
| ) | const |
Definition at line 1206 of file TargetTransformInfo.cpp.
References assert(), and CostKind.
Referenced by llvm::VPReductionRecipe::computeCost(), and llvm::LoopVectorizationCostModel::getReductionPatternCost().
| std::optional< unsigned > TargetTransformInfo::getMinPageSize | ( | ) | const |
Definition at line 838 of file TargetTransformInfo.cpp.
References MinPageSize.
| unsigned TargetTransformInfo::getMinPrefetchStride | ( | unsigned | NumMemAccesses, |
| unsigned | NumStridedMemAccesses, | ||
| unsigned | NumPrefetches, | ||
| bool | HasCall | ||
| ) | const |
Some HW prefetchers can handle accesses up to a certain constant stride.
Sometimes prefetching is beneficial even below the HW prefetcher limit, and the arguments provided are meant to serve as a basis for deciding this for a particular loop.
| NumMemAccesses | Number of memory accesses in the loop. |
| NumStridedMemAccesses | Number of the memory accesses that ScalarEvolution could find a known stride for. |
| NumPrefetches | Number of software prefetches that will be emitted as determined by the addresses involved and the cache line size. |
| HasCall | True if the loop contains a call. |
Definition at line 847 of file TargetTransformInfo.cpp.
| unsigned TargetTransformInfo::getMinTripCountTailFoldingThreshold | ( | ) | const |
Definition at line 1386 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizePass::processLoop().
| unsigned TargetTransformInfo::getMinVectorRegisterBitWidth | ( | ) | const |
Definition at line 781 of file TargetTransformInfo.cpp.
Referenced by llvm::slpvectorizer::BoUpSLP::BoUpSLP(), and canWidenLoad().
| InstructionCost TargetTransformInfo::getMulAccReductionCost | ( | bool | IsUnsigned, |
| Type * | ResTy, | ||
| VectorType * | Ty, | ||
| TTI::TargetCostKind | CostKind = TTI::TCK_RecipThroughput |
||
| ) | const |
Calculate the cost of an extended reduction pattern, similar to getArithmeticReductionCost of an Add reduction with multiply and optional extensions.
This is the cost of as: ResTy vecreduce.add(mul (A, B)). ResTy vecreduce.add(mul(ext(Ty A), ext(Ty B)).
Definition at line 1222 of file TargetTransformInfo.cpp.
References CostKind.
Referenced by llvm::LoopVectorizationCostModel::getReductionPatternCost().
Definition at line 1175 of file TargetTransformInfo.cpp.
Referenced by llvm::slpvectorizer::BoUpSLP::ShuffleCostEstimator::add(), llvm::slpvectorizer::BoUpSLP::computeMinimumValueSizes(), llvm::slpvectorizer::BoUpSLP::findReusedOrderedScalars(), getFloorFullVectorNumberOfElements(), getFullVectorNumberOfElements(), llvm::LoopVectorizationCostModel::getInstructionCost(), llvm::slpvectorizer::BoUpSLP::getReorderingData(), llvm::hasFullVectorsOrPowerOf2(), llvm::slpvectorizer::BoUpSLP::optimizeGatherSequence(), llvm::slpvectorizer::BoUpSLP::transformNodes(), and willGenerateVectors().
Definition at line 759 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizePass::runImpl(), llvm::SLPVectorizerPass::runImpl(), and llvm::LoopVectorizationCostModel::selectInterleaveCount().
Definition at line 1413 of file TargetTransformInfo.cpp.
References Size.
|
static |
Collect properties of V used in cost analysis, e.g. OP_PowerOf2.
Definition at line 871 of file TargetTransformInfo.cpp.
References llvm::getSplatValue(), I, OK_AnyValue, OK_NonUniformConstantValue, OK_UniformConstantValue, OK_UniformValue, OP_NegatedPowerOf2, OP_None, OP_PowerOf2, and llvm::Splat.
Referenced by llvm::VPWidenRecipe::computeCost(), llvm::VPWidenMemoryRecipe::computeCost(), llvm::LoopVectorizationCostModel::getDivRemSpeculationCost(), llvm::TargetTransformInfoImplCRTPBase< T >::getInstructionCost(), llvm::LoopVectorizationCostModel::getInstructionCost(), llvm::BasicTTIImplBase< T >::getIntrinsicInstrCost(), llvm::AArch64TTIImpl::getIntrinsicInstrCost(), and llvm::VPCostContext::getOperandInfo().
| InstructionCost TargetTransformInfo::getOperandsScalarizationOverhead | ( | ArrayRef< const Value * > | Args, |
| ArrayRef< Type * > | Tys, | ||
| TTI::TargetCostKind | CostKind | ||
| ) | const |
Estimate the overhead of scalarizing an instructions unique non-constant operands.
The (potentially vector) types to use for each of argument are passes via Tys.
Definition at line 635 of file TargetTransformInfo.cpp.
References CostKind.
| Value * TargetTransformInfo::getOrCreateResultFromMemIntrinsic | ( | IntrinsicInst * | Inst, |
| Type * | ExpectedType | ||
| ) | const |
Definition at line 1242 of file TargetTransformInfo.cpp.
| void TargetTransformInfo::getPeelingPreferences | ( | Loop * | L, |
| ScalarEvolution & | SE, | ||
| PeelingPreferences & | PP | ||
| ) | const |
Get target-customized preferences for the generic loop peeling transformation.
The caller will initialize PP with the current target-independent defaults with information from L and SE.
Definition at line 405 of file TargetTransformInfo.cpp.
Referenced by llvm::gatherPeelingPreferences().
| InstructionCost TargetTransformInfo::getPointersChainCost | ( | ArrayRef< const Value * > | Ptrs, |
| const Value * | Base, | ||
| const PointersChainInfo & | Info, | ||
| Type * | AccessTy, | ||
| TTI::TargetCostKind | CostKind = TTI::TCK_RecipThroughput |
||
| ) | const |
Estimate the cost of a chain of pointers (typically pointer operands of a chain of loads or stores within same block) operations set when lowered.
AccessTy is the type of the loads/stores that will ultimately use the Ptrs.
Definition at line 254 of file TargetTransformInfo.cpp.
References assert(), llvm::sampleprof::Base, CostKind, and Info.
Referenced by getGEPCosts().
| TargetTransformInfo::PopcntSupportKind TargetTransformInfo::getPopcntSupport | ( | unsigned | IntTyWidthInBit | ) | const |
Return hardware support for population count.
Definition at line 695 of file TargetTransformInfo.cpp.
| std::pair< const Value *, unsigned > TargetTransformInfo::getPredicatedAddrSpace | ( | const Value * | V | ) | const |
Definition at line 343 of file TargetTransformInfo.cpp.
Referenced by findAffectedValues().
| BranchProbability TargetTransformInfo::getPredictableBranchThreshold | ( | ) | const |
If a branch or a select condition is skewed in one direction by more than this factor, it is very likely to be predicted correctly.
Definition at line 279 of file TargetTransformInfo.cpp.
References PredictableBranchThreshold.
Referenced by foldTwoEntryPHINode(), isFormingBranchFromSelectProfitable(), isProfitableToSpeculate(), shouldFoldCondBranchesToCommonDestination(), and SimplifyCondBranchToCondBranch().
| TTI::AddressingModeKind TargetTransformInfo::getPreferredAddressingMode | ( | const Loop * | L, |
| ScalarEvolution * | SE | ||
| ) | const |
Return the preferred addressing mode LSR should make efforts to generate.
Definition at line 461 of file TargetTransformInfo.cpp.
| TargetTransformInfo::ReductionShuffle TargetTransformInfo::getPreferredExpandedReductionShuffle | ( | const IntrinsicInst * | II | ) | const |
Definition at line 1377 of file TargetTransformInfo.cpp.
References II.
| TailFoldingStyle TargetTransformInfo::getPreferredTailFoldingStyle | ( | bool | IVUpdateMayOverflow = true | ) | const |
Query the target what the preferred style of tail folding is.
| IVUpdateMayOverflow | Tells whether it is known if the IV update may (or will never) overflow for the suggested VF/UF in the given loop. Targets can use this information to select a more optimal tail folding style. The value conservatively defaults to true, such that no assumptions are made on overflow. |
Definition at line 371 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizationCostModel::setTailFoldingStyles().
| unsigned TargetTransformInfo::getPrefetchDistance | ( | ) | const |
Definition at line 843 of file TargetTransformInfo.cpp.
| TypeSize TargetTransformInfo::getRegisterBitWidth | ( | TargetTransformInfo::RegisterKind | K | ) | const |
Definition at line 776 of file TargetTransformInfo.cpp.
Referenced by llvm::slpvectorizer::BoUpSLP::BoUpSLP(), determineVPlanVF(), and llvm::LoopAccessInfo::LoopAccessInfo().
Definition at line 767 of file TargetTransformInfo.cpp.
References llvm::Vector.
Referenced by llvm::LoopVectorizationCostModel::calculateRegisterUsage(), llvm::LoopVectorizePass::runImpl(), and llvm::SLPVectorizerPass::runImpl().
Definition at line 772 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizationCostModel::calculateRegisterUsage(), and llvm::LoopVectorizationCostModel::selectInterleaveCount().
Returns the estimated number of registers required to represent Ty.
Definition at line 587 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizationCostModel::calculateRegisterUsage().
| InstructionCost TargetTransformInfo::getReplicationShuffleCost | ( | Type * | EltTy, |
| int | ReplicationFactor, | ||
| int | VF, | ||
| const APInt & | DemandedDstElts, | ||
| TTI::TargetCostKind | CostKind | ||
| ) | const |
VF elements typed EltTy ReplicationFactor times.For example, the mask for ReplicationFactor=3 and VF=4 is: <0,0,0,1,1,1,2,2,2,3,3,3>
Definition at line 1098 of file TargetTransformInfo.cpp.
| InstructionCost TargetTransformInfo::getScalarizationOverhead | ( | VectorType * | Ty, |
| const APInt & | DemandedElts, | ||
| bool | Insert, | ||
| bool | Extract, | ||
| TTI::TargetCostKind | CostKind, | ||
| ArrayRef< Value * > | VL = {} |
||
| ) | const |
Estimate the overhead of scalarizing an instruction.
Insert and Extract are set if the demanded result elements need to be inserted and/or extracted from vectors. The involved values may be passed in VL if Insert is true.
Definition at line 628 of file TargetTransformInfo.cpp.
References CostKind.
Referenced by llvm::slpvectorizer::BoUpSLP::canVectorizeLoads(), llvm::LoopVectorizationCostModel::getInstructionCost(), and llvm::slpvectorizer::BoUpSLP::isTreeTinyAndNotFullyVectorizable().
| InstructionCost TargetTransformInfo::getScalingFactorCost | ( | Type * | Ty, |
| GlobalValue * | BaseGV, | ||
| StackOffset | BaseOffset, | ||
| bool | HasBaseReg, | ||
| int64_t | Scale, | ||
| unsigned | AddrSpace = 0 |
||
| ) | const |
Return the cost of the scaling factor used in the addressing mode represented by AM for this target, for a load/store of the specified type.
If the AM is supported, the return value must be >= 0. If the AM is not supported, it returns a negative value. TODO: Handle pre/postinc as well.
Definition at line 560 of file TargetTransformInfo.cpp.
References assert().
Referenced by getScalingFactorCost().
| InstructionCost TargetTransformInfo::getShuffleCost | ( | ShuffleKind | Kind, |
| VectorType * | Tp, | ||
| ArrayRef< int > | Mask = {}, |
||
| TTI::TargetCostKind | CostKind = TTI::TCK_RecipThroughput, |
||
| int | Index = 0, |
||
| VectorType * | SubTp = nullptr, |
||
| ArrayRef< const Value * > | Args = {}, |
||
| const Instruction * | CxtI = nullptr |
||
| ) | const |
Args, which helps improve the cost estimation in some cases, like in broadcast loads. NOTE: For subvector extractions Tp represents the source type. Definition at line 967 of file TargetTransformInfo.cpp.
References assert(), and CostKind.
Referenced by llvm::VPFirstOrderRecurrencePHIRecipe::computeCost(), llvm::VPInterleaveRecipe::computeCost(), llvm::VPWidenMemoryRecipe::computeCost(), llvm::VPWidenLoadEVLRecipe::computeCost(), llvm::VPWidenStoreEVLRecipe::computeCost(), llvm::LoopVectorizationCostModel::getInstructionCost(), isFreeConcat(), and llvm::LoopVectorizationCostModel::setVectorizedCallDecision().
| unsigned TargetTransformInfo::getStoreMinimumVF | ( | unsigned | VF, |
| Type * | ScalarMemTy, | ||
| Type * | ScalarValTy | ||
| ) | const |
| VF | Initial estimation of the minimum vector factor. |
| ScalarMemTy | Scalar memory type of the store operation. |
| ScalarValTy | Scalar type of the stored value. Currently only used by the SLP vectorizer. |
Definition at line 812 of file TargetTransformInfo.cpp.
| unsigned TargetTransformInfo::getStoreVectorFactor | ( | unsigned | VF, |
| unsigned | StoreSize, | ||
| unsigned | ChainSizeInBytes, | ||
| VectorType * | VecTy | ||
| ) | const |
SizeInBytes stores or has a better vector factor. Definition at line 1334 of file TargetTransformInfo.cpp.
| InstructionCost TargetTransformInfo::getStridedMemoryOpCost | ( | unsigned | Opcode, |
| Type * | DataTy, | ||
| const Value * | Ptr, | ||
| bool | VariableMask, | ||
| Align | Alignment, | ||
| TTI::TargetCostKind | CostKind = TTI::TCK_RecipThroughput, |
||
| const Instruction * | I = nullptr |
||
| ) | const |
Opcode - is a type of memory access Load or Store DataTy - a vector type of the data to be loaded or stored Ptr - pointer [or vector of pointers] - address[es] in memory VariableMask - true when the memory access is predicated with a mask that is not a compile-time constant Alignment - alignment of single element I - the optional original context instruction, if one exists, e.g. the load/store to transform or the call to the gather/scatter intrinsic Definition at line 1138 of file TargetTransformInfo.cpp.
References assert(), CostKind, I, and Ptr.
Referenced by llvm::slpvectorizer::BoUpSLP::canVectorizeLoads(), and llvm::slpvectorizer::BoUpSLP::transformNodes().
| bool TargetTransformInfo::getTgtMemIntrinsic | ( | IntrinsicInst * | Inst, |
| MemIntrinsicInfo & | Info | ||
| ) | const |
Definition at line 1233 of file TargetTransformInfo.cpp.
References Info.
Referenced by getAccessType(), and isAddressUse().
| void TargetTransformInfo::getUnrollingPreferences | ( | Loop * | L, |
| ScalarEvolution & | SE, | ||
| UnrollingPreferences & | UP, | ||
| OptimizationRemarkEmitter * | ORE | ||
| ) | const |
Get target-customized preferences for the generic loop unrolling transformation.
The caller will initialize UP with the current target-independent defaults.
Definition at line 399 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizationPlanner::executePlan(), and llvm::gatherUnrollingPreferences().
| InstructionCost TargetTransformInfo::getVectorInstrCost | ( | const Instruction & | I, |
| Type * | Val, | ||
| TTI::TargetCostKind | CostKind, | ||
| unsigned | Index = -1 |
||
| ) | const |
A typical suitable use case is cost estimation when vector instruction exists (e.g., from basic blocks during transformation).
Definition at line 1087 of file TargetTransformInfo.cpp.
| InstructionCost TargetTransformInfo::getVectorInstrCost | ( | unsigned | Opcode, |
| Type * | Val, | ||
| TTI::TargetCostKind | CostKind, | ||
| unsigned | Index, | ||
| Value * | Scalar, | ||
| ArrayRef< std::tuple< Value *, User *, int > > | ScalarUserAndIdx | ||
| ) | const |
| ScalarUserAndIdx | encodes the information about extracts from a vector with 'Scalar' being the value being extracted,'User' being the user of the extract(nullptr if user is not known before vectorization) and 'Idx' being the extract lane. |
Definition at line 1073 of file TargetTransformInfo.cpp.
| InstructionCost TargetTransformInfo::getVectorInstrCost | ( | unsigned | Opcode, |
| Type * | Val, | ||
| TTI::TargetCostKind | CostKind, | ||
| unsigned | Index = -1, |
||
| Value * | Op0 = nullptr, |
||
| Value * | Op1 = nullptr |
||
| ) | const |
Definition at line 1061 of file TargetTransformInfo.cpp.
References assert(), and CostKind.
Referenced by llvm::slpvectorizer::BoUpSLP::getReorderingData(), and llvm::slpvectorizer::BoUpSLP::getTreeCost().
| TargetTransformInfo::VPLegalization TargetTransformInfo::getVPLegalizationStrategy | ( | const VPIntrinsic & | PI | ) | const |
Definition at line 1360 of file TargetTransformInfo.cpp.
| InstructionCost llvm::TargetTransformInfo::getVPMemoryOpCost | ( | unsigned | Opcode, |
| Type * | Src, | ||
| Align | Alignment, | ||
| unsigned | AddressSpace, | ||
| TTI::TargetCostKind | CostKind = TTI::TCK_RecipThroughput, |
||
| const Instruction * | I = nullptr |
||
| ) | const |
| std::optional< unsigned > TargetTransformInfo::getVScaleForTuning | ( | ) | const |
Definition at line 789 of file TargetTransformInfo.cpp.
Referenced by getVScaleForTuning().
| bool TargetTransformInfo::hasActiveVectorLength | ( | unsigned | Opcode, |
| Type * | DataType, | ||
| Align | Alignment | ||
| ) | const |
Definition at line 1398 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizationCostModel::setTailFoldingStyles().
Used by the LowerTypeTests pass, which constructs an IR inline assembler node containing a jump table in a format suitable for the target, so it needs to know what format of jump table it can legally use.
For non-Arm targets, this function isn't used. It defaults to returning false, but it shouldn't matter what it returns anyway.
Definition at line 1364 of file TargetTransformInfo.cpp.
Return true if branch divergence exists.
Branch divergence has a significantly negative impact on GPU performance when threads in the same wavefront take different paths due to conditional branches.
If F is passed, provides a context function. If F is known to only execute in a single threaded environment, the target may choose to skip uniformity analysis and assume all values are uniform.
Definition at line 289 of file TargetTransformInfo.cpp.
References F.
Referenced by llvm::LoopVectorizationCostModel::computeMaxVF(), llvm::UniformityInfoAnalysis::run(), llvm::JumpThreadingPass::run(), runImpl(), llvm::SpeculativeExecutionPass::runImpl(), and unswitchLoop().
Definition at line 763 of file TargetTransformInfo.cpp.
Referenced by isSafeCheapLoadStore().
Return true if the target has a unified operation to calculate division and remainder.
If so, the additional implicit multiplication and subtraction required to calculate a remainder from division are free. This can enable more aggressive transformations for division and remainder than would typically be allowed using throughput or size cost models.
Definition at line 547 of file TargetTransformInfo.cpp.
Referenced by optimizeDivRem().
| bool TargetTransformInfo::hasVolatileVariant | ( | Instruction * | I, |
| unsigned | AddrSpace | ||
| ) | const |
Return true if the given instruction (assumed to be a memory access instruction) has a volatile variant.
If that's the case then we can avoid addrspacecast to generic AS for volatile loads/stores. Default implementation returns false, which prevents address space inference for volatile loads/stores.
Definition at line 551 of file TargetTransformInfo.cpp.
References I.
Referenced by replaceSimplePointerUse().
Return true if the hardware has a fast square-root instruction.
Definition at line 699 of file TargetTransformInfo.cpp.
Referenced by foldSqrt(), and runPartiallyInlineLibCalls().
| std::optional< Instruction * > TargetTransformInfo::instCombineIntrinsic | ( | InstCombiner & | IC, |
| IntrinsicInst & | II | ||
| ) | const |
Targets can implement their own combinations for target-specific intrinsics.
This function will be called from the InstCombine pass every time a target-specific intrinsic is encountered.
Definition at line 377 of file TargetTransformInfo.cpp.
References II.
Referenced by llvm::InstCombiner::targetInstCombineIntrinsic().
|
inline |
Handle the invalidation of this information.
When used as a result of TargetIRAnalysis this method will be called when the function this was computed for changes. When it returns false, the information is preserved across those changes.
Definition at line 241 of file TargetTransformInfo.h.
Definition at line 301 of file TargetTransformInfo.cpp.
Referenced by llvm::GenericUniformityAnalysisImpl< ContextT >::initialize().
Definition at line 1323 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::isExpensiveToSpeculativelyExecute | ( | const Instruction * | I | ) | const |
Return true if the cost of the instruction is too high to speculatively execute and should be kept behind a branch.
This normally just wraps around a getInstructionCost() call, but some targets might report a low TCK_SizeAndLatency value that is incompatible with the fixed TCC_Expensive value. NOTE: This assumes the instruction passes isSafeToSpeculativelyExecute().
Definition at line 703 of file TargetTransformInfo.cpp.
References I.
Referenced by sinkSelectOperand().
Return true if it is faster to check if a floating-point value is NaN (or not-NaN) versus a comparison against a constant FP zero value.
Targets should override this if materializing a 0.0 for comparison is generally as cheap as checking for ordered/unordered.
Definition at line 708 of file TargetTransformInfo.cpp.
Referenced by optimizeSQRT().
| bool TargetTransformInfo::isFPVectorizationPotentiallyUnsafe | ( | ) | const |
Indicate that it is potentially unsafe to automatically vectorize floating-point operations because the semantics of vector and scalar floating-point semantics may differ.
For example, ARM NEON v7 SIMD math does not support IEEE-754 denormal numbers, while depending on the platform, scalar floating-point math does. This applies to floating-point math operations and calls, not memory operations, shuffles, or casts.
Definition at line 680 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizePass::processLoop().
| bool TargetTransformInfo::isHardwareLoopProfitable | ( | Loop * | L, |
| ScalarEvolution & | SE, | ||
| AssumptionCache & | AC, | ||
| TargetLibraryInfo * | LibInfo, | ||
| HardwareLoopInfo & | HWLoopInfo | ||
| ) | const |
Query the target whether it would be profitable to convert the given loop into a hardware loop.
Definition at line 356 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::isIndexedLoadLegal | ( | enum MemIndexedMode | Mode, |
| Type * | Ty | ||
| ) | const |
Definition at line 1284 of file TargetTransformInfo.cpp.
Referenced by canHoistIVInc(), and mayUsePostIncMode().
| bool TargetTransformInfo::isIndexedStoreLegal | ( | enum MemIndexedMode | Mode, |
| Type * | Ty | ||
| ) | const |
Definition at line 1289 of file TargetTransformInfo.cpp.
Referenced by canHoistIVInc(), and mayUsePostIncMode().
| bool TargetTransformInfo::isLegalAddImmediate | ( | int64_t | Imm | ) | const |
Return true if the specified immediate is legal add immediate, that is the target has add instructions which can add a register with the immediate without having to materialize the immediate into a register.
Definition at line 410 of file TargetTransformInfo.cpp.
Referenced by isLegalAddImmediate().
| bool TargetTransformInfo::isLegalAddressingMode | ( | Type * | Ty, |
| GlobalValue * | BaseGV, | ||
| int64_t | BaseOffset, | ||
| bool | HasBaseReg, | ||
| int64_t | Scale, | ||
| unsigned | AddrSpace = 0, |
||
| Instruction * | I = nullptr, |
||
| int64_t | ScalableOffset = 0 |
||
| ) | const |
Return true if the addressing mode represented by AM is legal for this target, for a load/store of the specified type.
The type may be VoidTy, in which case only return true if the addressing mode is legal for a load/store of any legal type. If target returns true in LSRWithInstrQueries(), I may be valid.
| ScalableOffset | represents a quantity of bytes multiplied by vscale, an invariant value known only at runtime. Most targets should not accept a scalable offset. |
TODO: Handle pre/postinc as well.
Definition at line 422 of file TargetTransformInfo.cpp.
References I.
Referenced by isAddFoldable(), isAMCompletelyFolded(), and IsSimplerBaseSCEVForTarget().
| bool TargetTransformInfo::isLegalAddScalableImmediate | ( | int64_t | Imm | ) | const |
Return true if adding the specified scalable immediate is legal, that is the target has add instructions which can add a register with the immediate (multiplied by vscale) without having to materialize the immediate into a register.
Definition at line 414 of file TargetTransformInfo.cpp.
Referenced by isLegalAddImmediate().
| bool TargetTransformInfo::isLegalAltInstr | ( | VectorType * | VecTy, |
| unsigned | Opcode0, | ||
| unsigned | Opcode1, | ||
| const SmallBitVector & | OpcodeMask | ||
| ) | const |
Return true if this is an alternating opcode pattern that can be lowered to a single instruction on the target.
In X86 this is for the addsub instruction which corrsponds to a Shuffle + Fadd + FSub pattern in IR. This function expectes two opcodes: Opcode1 and Opcode2 being selected by OpcodeMask. The mask contains one bit per lane and is a 0 when Opcode0 is selected and 1 when Opcode1 is selected. VecTy is the vector type of the instruction to be generated.
Definition at line 495 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::isLegalBroadcastLoad | ( | Type * | ElementTy, |
| ElementCount | NumElements | ||
| ) | const |
\Returns true if the target supports broadcasting a load to a vector of type <NumElements x ElementTy>.
Definition at line 485 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::isLegalICmpImmediate | ( | int64_t | Imm | ) | const |
Return true if the specified immediate is legal icmp immediate, that is the target has icmp instructions which can compare a register against the immediate without having to materialize the immediate into a register.
Definition at line 418 of file TargetTransformInfo.cpp.
Referenced by isAMCompletelyFolded().
| bool TargetTransformInfo::isLegalInterleavedAccessType | ( | VectorType * | VTy, |
| unsigned | Factor, | ||
| Align | Alignment, | ||
| unsigned | AddrSpace | ||
| ) | const |
Return true is the target supports interleaved access for the given vector type VTy, interleave factor Factor, alignment Alignment and address space AddrSpace.
Definition at line 531 of file TargetTransformInfo.cpp.
Referenced by llvm::slpvectorizer::BoUpSLP::transformNodes().
Return true if the target supports masked compress store.
Definition at line 516 of file TargetTransformInfo.cpp.
Referenced by optimizeCallInst().
Return true if the target supports masked expand load.
Definition at line 521 of file TargetTransformInfo.cpp.
Referenced by optimizeCallInst().
Return true if the target supports masked gather.
Definition at line 490 of file TargetTransformInfo.cpp.
Referenced by llvm::slpvectorizer::BoUpSLP::canVectorizeLoads(), llvm::LoopVectorizationCostModel::isLegalGatherOrScatter(), llvm::LoopVectorizationCostModel::isScalarWithPredication(), and optimizeCallInst().
Return true if the target supports masked load.
Definition at line 471 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizationCostModel::interleavedAccessCanBeWidened(), llvm::LoopVectorizationCostModel::isLegalMaskedLoad(), and optimizeCallInst().
Return true if the target supports masked scatter.
Definition at line 501 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizationCostModel::isLegalGatherOrScatter(), llvm::LoopVectorizationCostModel::isScalarWithPredication(), and optimizeCallInst().
Return true if the target supports masked store.
Definition at line 466 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizationCostModel::interleavedAccessCanBeWidened(), llvm::LoopVectorizationCostModel::isLegalMaskedStore(), and optimizeCallInst().
Definition at line 538 of file TargetTransformInfo.cpp.
Referenced by optimizeCallInst().
Return true if the target supports nontemporal load.
Definition at line 481 of file TargetTransformInfo.cpp.
Return true if the target supports nontemporal store.
Definition at line 476 of file TargetTransformInfo.cpp.
Return true if the target supports strided load.
Definition at line 526 of file TargetTransformInfo.cpp.
Referenced by llvm::slpvectorizer::BoUpSLP::canVectorizeLoads(), and llvm::slpvectorizer::BoUpSLP::transformNodes().
Definition at line 1298 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::isLegalToVectorizeLoadChain | ( | unsigned | ChainSizeInBytes, |
| Align | Alignment, | ||
| unsigned | AddrSpace | ||
| ) | const |
Definition at line 1306 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::isLegalToVectorizeReduction | ( | const RecurrenceDescriptor & | RdxDesc, |
| ElementCount | VF | ||
| ) | const |
Definition at line 1318 of file TargetTransformInfo.cpp.
Definition at line 1302 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::isLegalToVectorizeStoreChain | ( | unsigned | ChainSizeInBytes, |
| Align | Alignment, | ||
| unsigned | AddrSpace | ||
| ) | const |
Definition at line 1312 of file TargetTransformInfo.cpp.
Test whether calls to a function lower to actual program function calls.
The idea is to test whether the program is likely to require a 'call' instruction or equivalent in order to call the given function.
FIXME: It's not clear that this is a good or useful query API. Client's should probably move to simpler cost metrics using the above. Alternatively, we could split the cost interface into distinct code-size and execution-speed costs. This would allow modelling the core of this query more accurately as a call is a single small instruction, but incurs significant execution cost.
Definition at line 352 of file TargetTransformInfo.cpp.
References F.
Referenced by llvm::CodeMetrics::analyzeBasicBlock(), analyzeLoopUnrollCost(), and runCGProfilePass().
| bool TargetTransformInfo::isLSRCostLess | ( | const TargetTransformInfo::LSRCost & | C1, |
| const TargetTransformInfo::LSRCost & | C2 | ||
| ) | const |
Return true if LSR cost of C1 is lower than C2.
Definition at line 432 of file TargetTransformInfo.cpp.
Definition at line 324 of file TargetTransformInfo.cpp.
Referenced by isNoopPtrIntCastPair().
| bool TargetTransformInfo::isNumRegsMajorCostOfLSR | ( | ) | const |
Return true if LSR major cost is number of registers.
Targets which implement their own isLSRCostLess and unset number of registers as major cost should return false, otherwise return true.
Definition at line 437 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::isProfitableLSRChainElement | ( | Instruction * | I | ) | const |
I. Definition at line 445 of file TargetTransformInfo.cpp.
References I.
Referenced by isProfitableChain().
| bool TargetTransformInfo::isProfitableToHoist | ( | Instruction * | I | ) | const |
Return true if it is profitable to hoist instruction in the then/else to before if.
Definition at line 577 of file TargetTransformInfo.cpp.
References I.
Referenced by shouldHoistCommonInstructions().
| bool TargetTransformInfo::isProfitableToSinkOperands | ( | Instruction * | I, |
| SmallVectorImpl< Use * > & | Ops | ||
| ) | const |
Return true if sinking I's operands to the same basic block as I is profitable, e.g.
because the operands can be folded into a target instruction during instruction selection. After calling the function Ops contains the Uses to sink ordered by dominance (dominating users come first).
Definition at line 1403 of file TargetTransformInfo.cpp.
References I.
| bool TargetTransformInfo::isSingleThreaded | ( | ) | const |
Definition at line 338 of file TargetTransformInfo.cpp.
Returns whether V is a source of divergence.
This function provides the target-dependent information for the target-independent UniformityAnalysis.
Definition at line 293 of file TargetTransformInfo.cpp.
Referenced by llvm::GenericUniformityAnalysisImpl< ContextT >::initialize().
| bool TargetTransformInfo::isTargetIntrinsicTriviallyScalarizable | ( | Intrinsic::ID | ID | ) | const |
Definition at line 608 of file TargetTransformInfo.cpp.
Referenced by llvm::isTriviallyScalarizable().
| bool TargetTransformInfo::isTargetIntrinsicWithOverloadTypeAtArg | ( | Intrinsic::ID | ID, |
| int | OpdIdx | ||
| ) | const |
Identifies if the vector form of the intrinsic is overloaded on the type of the operand at index OpdIdx, or on the return type if OpdIdx is -1.
Definition at line 618 of file TargetTransformInfo.cpp.
Referenced by llvm::isVectorIntrinsicWithOverloadTypeAtArg().
| bool TargetTransformInfo::isTargetIntrinsicWithScalarOpAtArg | ( | Intrinsic::ID | ID, |
| unsigned | ScalarOpdIdx | ||
| ) | const |
Identifies if the vector form of the intrinsic has a scalar operand.
Definition at line 613 of file TargetTransformInfo.cpp.
Referenced by llvm::isVectorIntrinsicWithScalarOpAtArg().
| bool TargetTransformInfo::isTargetIntrinsicWithStructReturnOverloadAtField | ( | Intrinsic::ID | ID, |
| int | RetIdx | ||
| ) | const |
Identifies if the vector form of the intrinsic that returns a struct is overloaded at the struct element index RetIdx.
Definition at line 623 of file TargetTransformInfo.cpp.
Referenced by llvm::isVectorIntrinsicWithStructReturnOverloadAtField().
Return true if it's free to truncate a value of type Ty1 to type Ty2.
e.g. On x86 it's free to truncate a i32 value in register EAX to i16 by referencing its sub-register AX.
Definition at line 573 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizationCostModel::isOptimizableIVTruncate(), and llvm::SCEVExpander::replaceCongruentIVs().
Return true if this type is legal.
Definition at line 583 of file TargetTransformInfo.cpp.
Referenced by llvm::slpvectorizer::BoUpSLP::canVectorizeLoads(), llvm::computeMinimumValueSizes(), foldConsecutiveLoads(), isLoadCombineCandidateImpl(), and isTypeLegalForLookupTable().
Query the target whether the specified address space cast from FromAS to ToAS is valid.
Definition at line 305 of file TargetTransformInfo.cpp.
Referenced by llvm::expandMemMoveAsLoop(), llvm::InstCombiner::isValidAddrSpaceCast(), and tryInsertCastToCommonAddrSpace().
Return true if it's significantly cheaper to shift a vector by a uniform scalar than by an amount which will vary across each lane.
On x86 before AVX2 for example, there is a "psllw" instruction for the former case, but no simple instruction for a general "a << b" operation on vectors. This should also apply to lowering for vector funnel shifts (rotates).
Definition at line 1408 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::isVScaleKnownToBeAPowerOfTwo | ( | ) | const |
Definition at line 793 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizationCostModel::computeMaxVF().
| bool TargetTransformInfo::LSRWithInstrQueries | ( | ) | const |
Return true if the loop strength reduce pass should make Instruction* based TTI queries to isLegalAddressingMode().
This is needed on SystemZ, where e.g. a memcpy can only have a 12 bit unsigned immediate offset and no index register.
Definition at line 569 of file TargetTransformInfo.cpp.
Referenced by isAMCompletelyFolded().
| TargetTransformInfo & TargetTransformInfo::operator= | ( | TargetTransformInfo && | RHS | ) |
Definition at line 210 of file TargetTransformInfo.cpp.
References RHS.
| bool TargetTransformInfo::preferEpilogueVectorization | ( | ) | const |
Return true if the loop vectorizer should consider vectorizing an otherwise scalar epilogue loop.
Definition at line 1355 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizationCostModel::isEpilogueVectorizationProfitable().
| bool TargetTransformInfo::preferFixedOverScalableIfEqualCost | ( | ) | const |
Definition at line 1341 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::preferInLoopReduction | ( | unsigned | Opcode, |
| Type * | Ty, | ||
| ReductionFlags | Flags | ||
| ) | const |
Definition at line 1345 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizationCostModel::collectElementTypesForWidening(), and llvm::LoopVectorizationCostModel::collectInLoopReductions().
| bool TargetTransformInfo::preferPredicatedReductionSelect | ( | unsigned | Opcode, |
| Type * | Ty, | ||
| ReductionFlags | Flags | ||
| ) | const |
As opposed to the normal scheme of p = phi (0, a) which allows the select to be pulled out of the loop. If the select(.., add, ..) can be predicated by the target, this can lead to cleaner code generation.
Definition at line 1350 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizationCostModel::usePredicatedReductionSelect().
| bool TargetTransformInfo::preferPredicateOverEpilogue | ( | TailFoldingInfo * | TFI | ) | const |
Query the target whether it would be prefered to create a predicated vector loop, which can avoid the need to emit a scalar epilogue loop.
Definition at line 366 of file TargetTransformInfo.cpp.
Referenced by getScalarEpilogueLowering().
| bool TargetTransformInfo::prefersVectorizedAddressing | ( | ) | const |
Return true if target doesn't mind addresses in vectors.
Definition at line 556 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizationCostModel::setCostBasedWideningDecision().
| bool TargetTransformInfo::preferToKeepConstantsAttached | ( | const Instruction & | Inst, |
| const Function & | Fn | ||
| ) | const |
It can be advantageous to detach complex constants from their uses to make their generation cheaper.
This hook allows targets to report when such transformations might negatively effect the code generation of the underlying operation. The motivating example is divides whereby hoisting constants prevents the code generator's ability to transform them into combinations of simpler operations.
Definition at line 754 of file TargetTransformInfo.cpp.
|
inlinestatic |
A helper function to determine the type of reduction algorithm used for a given Opcode and set of FastMathFlags FMF.
Definition at line 1527 of file TargetTransformInfo.h.
Referenced by llvm::BasicTTIImplBase< T >::getArithmeticReductionCost(), llvm::AArch64TTIImpl::getArithmeticReductionCost(), llvm::GCNTTIImpl::getArithmeticReductionCost(), llvm::RISCVTTIImpl::getArithmeticReductionCost(), llvm::SystemZTTIImpl::getArithmeticReductionCost(), llvm::X86TTIImpl::getArithmeticReductionCost(), and llvm::ARMTTIImpl::getArithmeticReductionCost().
| Value * TargetTransformInfo::rewriteIntrinsicWithAddressSpace | ( | IntrinsicInst * | II, |
| Value * | OldV, | ||
| Value * | NewV | ||
| ) | const |
Rewrite intrinsic call II such that OldV will be replaced with NewV, which has a different address space.
This should happen for every operand index that collectFlatAddressOperands returned for the intrinsic.
II with modified operands). Definition at line 347 of file TargetTransformInfo.cpp.
References II.
| bool TargetTransformInfo::shouldBuildLookupTables | ( | ) | const |
Return true if switches should be turned into lookup tables for the target.
Definition at line 591 of file TargetTransformInfo.cpp.
Referenced by switchToLookupTable().
Return true if switches should be turned into lookup tables containing this constant value for the target.
Definition at line 595 of file TargetTransformInfo.cpp.
References llvm::CallingConv::C.
Referenced by validLookupTableConstant().
| bool TargetTransformInfo::shouldBuildRelLookupTables | ( | ) | const |
Return true if lookup tables should be turned into relative lookup tables.
Definition at line 600 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::shouldConsiderAddressTypePromotion | ( | const Instruction & | I, |
| bool & | AllowPromotionWithoutCommonHeader | ||
| ) | const |
AllowPromotionWithoutCommonHeader Set true if promoting I is profitable without finding other extensions fed by the same input. Definition at line 817 of file TargetTransformInfo.cpp.
References I.
| bool TargetTransformInfo::shouldDropLSRSolutionIfLessProfitable | ( | ) | const |
Return true if LSR should drop a found solution if it's calculated to be less profitable than the baseline.
Definition at line 441 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::shouldExpandReduction | ( | const IntrinsicInst * | II | ) | const |
Definition at line 1372 of file TargetTransformInfo.cpp.
References II.
| bool TargetTransformInfo::shouldMaximizeVectorBandwidth | ( | TargetTransformInfo::RegisterKind | K | ) | const |
K Register Kind for vectorization. Definition at line 797 of file TargetTransformInfo.cpp.
AS. Definition at line 862 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::shouldTreatInstructionLikeSelect | ( | const Instruction * | I | ) | const |
Should the Select Optimization pass treat the given instruction like a select, potentially converting it to a conditional branch.
This can include select-like instructions like or(zext(c), x) that can be converted to selects.
Definition at line 667 of file TargetTransformInfo.cpp.
References I.
| std::optional< Value * > TargetTransformInfo::simplifyDemandedUseBitsIntrinsic | ( | InstCombiner & | IC, |
| IntrinsicInst & | II, | ||
| APInt | DemandedMask, | ||
| KnownBits & | Known, | ||
| bool & | KnownBitsComputed | ||
| ) | const |
Can be used to implement target-specific instruction combining.
Definition at line 382 of file TargetTransformInfo.cpp.
References II.
Referenced by llvm::InstCombiner::targetSimplifyDemandedUseBitsIntrinsic().
| std::optional< Value * > TargetTransformInfo::simplifyDemandedVectorEltsIntrinsic | ( | InstCombiner & | IC, |
| IntrinsicInst & | II, | ||
| APInt | DemandedElts, | ||
| APInt & | UndefElts, | ||
| APInt & | UndefElts2, | ||
| APInt & | UndefElts3, | ||
| std::function< void(Instruction *, unsigned, APInt, APInt &)> | SimplifyAndSetOp | ||
| ) | const |
Can be used to implement target-specific instruction combining.
Definition at line 389 of file TargetTransformInfo.cpp.
References II.
Referenced by llvm::InstCombiner::targetSimplifyDemandedVectorEltsIntrinsic().
| bool TargetTransformInfo::supportsEfficientVectorElementLoadStore | ( | ) | const |
If target has efficient vector element load/store instructions, it can return true here so that insertion/extraction costs are not added to the scalarization cost of a load/store.
Definition at line 641 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::supportsScalableVectors | ( | ) | const |
Definition at line 1390 of file TargetTransformInfo.cpp.
Referenced by llvm::LoopVectorizationPlanner::planInVPlanNativePath().
If target supports tail call on CB.
Definition at line 649 of file TargetTransformInfo.cpp.
Referenced by llvm::coro::BaseCloner::create(), and llvm::coro::createMustTailCall().
| bool TargetTransformInfo::supportsTailCalls | ( | ) | const |
If the target supports tail calls.
Definition at line 645 of file TargetTransformInfo.cpp.
| bool TargetTransformInfo::useAA | ( | ) | const |
Definition at line 581 of file TargetTransformInfo.cpp.
Return true if the input function which is cold at all call sites, should use coldcc calling convention.
Definition at line 604 of file TargetTransformInfo.cpp.
References F.
Referenced by OptimizeFunctions().
1.9.6