#include "llvm/CodeGen/MultiHazardRecognizer.h"

Inheritance diagram for llvm::MultiHazardRecognizer:

Public Member Functions
	MultiHazardRecognizer ()=default

void	AddHazardRecognizer (std::unique_ptr< ScheduleHazardRecognizer > &&)

bool	atIssueLimit () const override
	atIssueLimit - Return true if no more instructions may be issued in this cycle.

HazardType	getHazardType (SUnit *, int Stalls=0) override
	getHazardType - Return the hazard type of emitting this node.

void	Reset () override
	Reset - This callback is invoked when a new block of instructions is about to be schedule.

void	EmitInstruction (SUnit *) override
	EmitInstruction - This callback is invoked when an instruction is emitted, to advance the hazard state.

void	EmitInstruction (MachineInstr *) override
	This overload will be used when the hazard recognizer is being used by a non-scheduling pass, which does not use SUnits.

unsigned	PreEmitNoops (SUnit *) override
	PreEmitNoops - This callback is invoked prior to emitting an instruction.

unsigned	PreEmitNoops (MachineInstr *) override
	This overload will be used when the hazard recognizer is being used by a non-scheduling pass, which does not use SUnits.

bool	ShouldPreferAnother (SUnit *) override
	ShouldPreferAnother - This callback may be invoked if getHazardType returns NoHazard.

void	AdvanceCycle () override
	AdvanceCycle - This callback is invoked whenever the next top-down instruction to be scheduled cannot issue in the current cycle, either because of latency or resource conflicts.

void	RecedeCycle () override
	RecedeCycle - This callback is invoked whenever the next bottom-up instruction to be scheduled cannot issue in the current cycle, either because of latency or resource conflicts.

void	EmitNoop () override
	EmitNoop - This callback is invoked when a noop was added to the instruction stream.

Public Member Functions inherited from llvm::ScheduleHazardRecognizer
	ScheduleHazardRecognizer ()=default

virtual	~ScheduleHazardRecognizer ()

unsigned	getMaxLookAhead () const

bool	isEnabled () const

virtual bool	atIssueLimit () const
	atIssueLimit - Return true if no more instructions may be issued in this cycle.

virtual HazardType	getHazardType (SUnit *, int Stalls=0)
	getHazardType - Return the hazard type of emitting this node.

virtual void	Reset ()
	Reset - This callback is invoked when a new block of instructions is about to be schedule.

virtual void	EmitInstruction (SUnit *)
	EmitInstruction - This callback is invoked when an instruction is emitted, to advance the hazard state.

virtual void	EmitInstruction (MachineInstr *)
	This overload will be used when the hazard recognizer is being used by a non-scheduling pass, which does not use SUnits.

virtual unsigned	PreEmitNoops (SUnit *)
	PreEmitNoops - This callback is invoked prior to emitting an instruction.

virtual unsigned	PreEmitNoops (MachineInstr *)
	This overload will be used when the hazard recognizer is being used by a non-scheduling pass, which does not use SUnits.

virtual bool	ShouldPreferAnother (SUnit *)
	ShouldPreferAnother - This callback may be invoked if getHazardType returns NoHazard.

virtual void	AdvanceCycle ()
	AdvanceCycle - This callback is invoked whenever the next top-down instruction to be scheduled cannot issue in the current cycle, either because of latency or resource conflicts.

virtual void	RecedeCycle ()
	RecedeCycle - This callback is invoked whenever the next bottom-up instruction to be scheduled cannot issue in the current cycle, either because of latency or resource conflicts.

virtual void	EmitNoop ()
	EmitNoop - This callback is invoked when a noop was added to the instruction stream.

virtual void	EmitNoops (unsigned Quantity)
	EmitNoops - This callback is invoked when noops were added to the instruction stream.

Additional Inherited Members
Public Types inherited from llvm::ScheduleHazardRecognizer
enum	HazardType { NoHazard , Hazard , NoopHazard }

Protected Attributes inherited from llvm::ScheduleHazardRecognizer
unsigned	MaxLookAhead = 0
	MaxLookAhead - Indicate the number of cycles in the scoreboard state.

Detailed Description

Definition at line 25 of file MultiHazardRecognizer.h.

Constructor & Destructor Documentation

◆ MultiHazardRecognizer()

llvm::MultiHazardRecognizer::MultiHazardRecognizer ( )

default

Member Function Documentation

◆ AddHazardRecognizer()

void MultiHazardRecognizer::AddHazardRecognizer ( std::unique_ptr< ScheduleHazardRecognizer > && R )

Definition at line 22 of file MultiHazardRecognizer.cpp.

References llvm::ScheduleHazardRecognizer::MaxLookAhead.

Referenced by llvm::ARMBaseInstrInfo::CreateTargetMIHazardRecognizer(), and llvm::ARMBaseInstrInfo::CreateTargetPostRAHazardRecognizer().

◆ AdvanceCycle()

void MultiHazardRecognizer::AdvanceCycle ( )

overridevirtual

AdvanceCycle - This callback is invoked whenever the next top-down instruction to be scheduled cannot issue in the current cycle, either because of latency or resource conflicts.

This should increment the internal state of the hazard recognizer so that previously "Hazard" instructions will now not be hazards.

Reimplemented from llvm::ScheduleHazardRecognizer.

Definition at line 79 of file MultiHazardRecognizer.cpp.

◆ atIssueLimit()

bool MultiHazardRecognizer::atIssueLimit ( ) const

overridevirtual

atIssueLimit - Return true if no more instructions may be issued in this cycle.

FIXME: remove this once MachineScheduler is the only client.

Reimplemented from llvm::ScheduleHazardRecognizer.

Definition at line 28 of file MultiHazardRecognizer.cpp.

References llvm::any_of(), and llvm::ScheduleHazardRecognizer::atIssueLimit().

◆ EmitInstruction() [1/2]

void MultiHazardRecognizer::EmitInstruction ( MachineInstr * )

overridevirtual

This overload will be used when the hazard recognizer is being used by a non-scheduling pass, which does not use SUnits.

Reimplemented from llvm::ScheduleHazardRecognizer.

Definition at line 53 of file MultiHazardRecognizer.cpp.

References MI.

◆ EmitInstruction() [2/2]

void MultiHazardRecognizer::EmitInstruction ( SUnit * )

overridevirtual

EmitInstruction - This callback is invoked when an instruction is emitted, to advance the hazard state.

Reimplemented from llvm::ScheduleHazardRecognizer.

Definition at line 48 of file MultiHazardRecognizer.cpp.

◆ EmitNoop()

void MultiHazardRecognizer::EmitNoop ( )

overridevirtual

EmitNoop - This callback is invoked when a noop was added to the instruction stream.

Reimplemented from llvm::ScheduleHazardRecognizer.

Definition at line 89 of file MultiHazardRecognizer.cpp.

◆ getHazardType()

ScheduleHazardRecognizer::HazardType MultiHazardRecognizer::getHazardType	(	SUnit *	,
		int	Stalls = `0`
	)

overridevirtual

getHazardType - Return the hazard type of emitting this node.

There are three possible results. Either:

NoHazard: it is legal to issue this instruction on this cycle.
Hazard: issuing this instruction would stall the machine. If some other instruction is available, issue it first.
NoopHazard: issuing this instruction would break the program. If some other instruction can be issued, do so, otherwise issue a noop.

Reimplemented from llvm::ScheduleHazardRecognizer.

Definition at line 34 of file MultiHazardRecognizer.cpp.

References llvm::ScheduleHazardRecognizer::NoHazard.

◆ PreEmitNoops() [1/2]

unsigned MultiHazardRecognizer::PreEmitNoops ( MachineInstr * )

overridevirtual

This overload will be used when the hazard recognizer is being used by a non-scheduling pass, which does not use SUnits.

Reimplemented from llvm::ScheduleHazardRecognizer.

Definition at line 65 of file MultiHazardRecognizer.cpp.

References MI.

◆ PreEmitNoops() [2/2]

unsigned MultiHazardRecognizer::PreEmitNoops ( SUnit * )

overridevirtual

PreEmitNoops - This callback is invoked prior to emitting an instruction.

It should return the number of noops to emit prior to the provided instruction. Note: This is only used during PostRA scheduling. EmitNoop is not called for these noops.

Reimplemented from llvm::ScheduleHazardRecognizer.

Definition at line 58 of file MultiHazardRecognizer.cpp.

◆ RecedeCycle()

void MultiHazardRecognizer::RecedeCycle ( )

overridevirtual

RecedeCycle - This callback is invoked whenever the next bottom-up instruction to be scheduled cannot issue in the current cycle, either because of latency or resource conflicts.

Reimplemented from llvm::ScheduleHazardRecognizer.

Definition at line 84 of file MultiHazardRecognizer.cpp.

◆ Reset()

void MultiHazardRecognizer::Reset ( )

overridevirtual

Reset - This callback is invoked when a new block of instructions is about to be schedule.

The hazard state should be set to an initialized state.

Reimplemented from llvm::ScheduleHazardRecognizer.

Definition at line 43 of file MultiHazardRecognizer.cpp.

◆ ShouldPreferAnother()

bool MultiHazardRecognizer::ShouldPreferAnother ( SUnit * )

overridevirtual

ShouldPreferAnother - This callback may be invoked if getHazardType returns NoHazard.

If, even though there is no hazard, it would be better to schedule another available instruction, this callback should return true.

Reimplemented from llvm::ScheduleHazardRecognizer.

Definition at line 72 of file MultiHazardRecognizer.cpp.

References llvm::any_of().

The documentation for this class was generated from the following files:

include/llvm/CodeGen/MultiHazardRecognizer.h
lib/CodeGen/MultiHazardRecognizer.cpp

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ MultiHazardRecognizer()

Member Function Documentation

◆ AddHazardRecognizer()

◆ AdvanceCycle()

◆ atIssueLimit()

◆ EmitInstruction() [1/2]

◆ EmitInstruction() [2/2]

◆ EmitNoop()

◆ getHazardType()

◆ PreEmitNoops() [1/2]

◆ PreEmitNoops() [2/2]

◆ RecedeCycle()

◆ Reset()

◆ ShouldPreferAnother()